Beko
Beko Washing Machine Heater ElementC00912662
Suitable for Beko, Altus, Arcelik, Arctic, Blomberg
Stock Code: 1072575
£43.62inc. VAT
£36.35 ex. VAT
Usually despatched within 6 weeks
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the wash water to the selected programme temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E11 | Beko | Means a heating element failure or an NTC temperature sensor fault, so the water is not getting hot. It is usually caused by a faulty heating element or temperature sensor. | High |
| E19 | Beko | Means a heating failure where the machine cannot heat the water during a wash cycle, or on some models a general drainage issue or fan malfunction. It is usually caused by a failure to heat, or by a drainage fault or fan that stops the cycle completing. | High |
| E2 | Beko | Means a failure to heat the water during a wash cycle. It is usually caused by a faulty heating element or an NTC temperature sensor issue. | High |
| E60 | Beko | Means a heating failure, where the machine cannot heat the water to the required temperature. It is usually caused by a faulty heating element or a malfunctioning temperature sensor (thermostat). | High |
| H1 | Beko | Means a fault with the heating system, where the machine fails to heat the water or the heater operates when it should not. It is usually caused by a heating fault or a control board issue. | High |
| H2 | Beko | Means a heating circuit fault, where the control board cannot detect the heating element or the water is not heating, so the machine stops the cycle. It is usually caused by a faulty heating element or control board. | High |
E11High
Beko
Means a heating element failure or an NTC temperature sensor fault, so the water is not getting hot. It is usually caused by a faulty heating element or temperature sensor.
E19High
Beko
Means a heating failure where the machine cannot heat the water during a wash cycle, or on some models a general drainage issue or fan malfunction. It is usually caused by a failure to heat, or by a drainage fault or fan that stops the cycle completing.
E2High
Beko
Means a failure to heat the water during a wash cycle. It is usually caused by a faulty heating element or an NTC temperature sensor issue.
E60High
Beko
Means a heating failure, where the machine cannot heat the water to the required temperature. It is usually caused by a faulty heating element or a malfunctioning temperature sensor (thermostat).
H1High
Beko
Means a fault with the heating system, where the machine fails to heat the water or the heater operates when it should not. It is usually caused by a heating fault or a control board issue.
H2High
Beko
Means a heating circuit fault, where the control board cannot detect the heating element or the water is not heating, so the machine stops the cycle. It is usually caused by a faulty heating element or control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver or socket
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- C00912662
- Alternative Part Numbers
- 2863403100
- Genuine Spare Part
- Yes