Beko
Beko Washing Machine Drain Pump & FilterC00912661
Suitable for Beko, Altus, Arcelik, Arctic, Belling
Stock Code: 833037
£38.35inc. VAT
£31.96 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Pumps the waste water out and traps debris before it reaches the pump.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E13 | Beko | Means a motor communication fault, where the control board cannot communicate with the motor, or a drainage or water level sensor issue. It is usually caused by loose wiring, a faulty motor control board, or water drainage issues preventing the cycle from starting. | Medium |
| E18 | Beko | Means a drainage problem, where the machine cannot empty water within the expected time. It is usually caused by a clogged drain pump filter or a blocked sump hose. | High |
| E23 | Beko | Means a drainage issue where the machine cannot drain. It is usually caused by a blocked pump filter behind the bottom right service flap, a kinked drain hose, or a malfunctioning drain pump. | High |
| E5 | Beko | Means a drainage fault, where the machine cannot empty water within the allotted time. It is usually caused by a blocked drain pump filter, a kinked hose, or a faulty pump. | High |
| E2 | Blomberg | Means the machine cannot empty water within the required five to eight minutes. It is usually caused by a blocked drain pump filter, a kinked outlet hose, or a faulty pump. | High |
| E12 | Grundig | Means a drainage problem, or a flood switch error where water has leaked into the base and the flood switch has activated. It is usually caused by kinks or blockages in the drain hose. | High |
| E3 | Grundig | Means the machine cannot empty the drum. It is usually caused by a blocked drain filter, an obstructed drain hose, or a malfunctioning pump. | High |
| E5 | Grundig | Means the machine cannot empty its water, preventing the spin cycle from starting. It is usually caused by a clogged pump filter, a blocked drain hose, or a faulty drain pump. | High |
E13Medium
Beko
Means a motor communication fault, where the control board cannot communicate with the motor, or a drainage or water level sensor issue. It is usually caused by loose wiring, a faulty motor control board, or water drainage issues preventing the cycle from starting.
E18High
Beko
Means a drainage problem, where the machine cannot empty water within the expected time. It is usually caused by a clogged drain pump filter or a blocked sump hose.
E23High
Beko
Means a drainage issue where the machine cannot drain. It is usually caused by a blocked pump filter behind the bottom right service flap, a kinked drain hose, or a malfunctioning drain pump.
E5High
Beko
Means a drainage fault, where the machine cannot empty water within the allotted time. It is usually caused by a blocked drain pump filter, a kinked hose, or a faulty pump.
E2High
Blomberg
Means the machine cannot empty water within the required five to eight minutes. It is usually caused by a blocked drain pump filter, a kinked outlet hose, or a faulty pump.
E12High
Grundig
Means a drainage problem, or a flood switch error where water has leaked into the base and the flood switch has activated. It is usually caused by kinks or blockages in the drain hose.
E3High
Grundig
Means the machine cannot empty the drum. It is usually caused by a blocked drain filter, an obstructed drain hose, or a malfunctioning pump.
E5High
Grundig
Means the machine cannot empty its water, preventing the spin cycle from starting. It is usually caused by a clogged pump filter, a blocked drain hose, or a faulty drain pump.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliersTowelShallow tray
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- C00912661
- Alternative Part Numbers
- 2840940100, 2840941500
- Genuine Spare Part
- Yes
07
More Details
This is a genuine drain pump and filter.
The filter housing keeps the lint filter securely in place, catching fluff, dirt, and small objects before they reach the drain pump. This helps prevent blockages, protects your washer’s internal parts, and ensures smooth water drainage after each cycle.
If your laundry is wetter than usual, the machine won’t finish its cycle, or draining is slow, the filter housing might be damaged or blocked. Replace it with this part.
This washing machine drain pump and filter is from Beko. It also suits Altus, Arcelik, Belling, Blomberg, Cylinda, Flavel, Grundig, Lamona, Leisure, Montpellier, and New World models.
Before ordering, please verify that this part works for your model using our compatibility checker.
08
Customer Reviews (2)
5.02 reviews
5
2
4
0
3
0
2
0
1
0
Pump
Good product Easy to fit and works perfectly Will buy agin if required
David Lee · Preston ·
Quality
Value
Ease of Fitting
Easiest fit
At most, I only needed the pump bit (and actually later worked out I had a different problem altogether!). However, this was really easy to fit and worked first time with no leaks (it helped to but maching in its side for easier access - a good idea to secure with transport bolts first). Do not try to get the (much much cheaper) pump only part as the two bits do nit spearate very easily (not for me anyway). Found all sorts of debris in the old pump and the big hose from the drum (do check this). new one works a treat!
Richard · London ·
Quality
Value
Ease of Fitting