Beko
Beko Washing Machine Door InterlockC00864814
Suitable for Beko, Altus, Belling, Blomberg, Flavel
Stock Code: 830735
£13.75inc. VAT
£11.46 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Locks the door shut while the cycle is running.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E10 | Beko | Means a door lock jam or sensor issue, where the machine cannot detect that the door is securely closed. It is usually caused by the door lock, or by a water inlet, drainage, or motor control board malfunction. | High |
| E28 | Beko | Means a door lock mechanism failure, where the machine cannot confirm the door is securely closed. It is usually caused by the door lock, or by a water drainage issue keeping the door locked. | High |
| E9 | Beko | Means a door lock failure, where the machine cannot detect that the door is closed, latched, and locked properly. It is usually caused by a faulty door lock mechanism, a poor connection in the door circuit, or a failed control board. | High |
| E12 | Blomberg | Means the machine cannot detect that the door is securely closed, so it will not start a cycle or stops mid cycle. It is usually caused by a faulty lock, a wiring fault, or an obstruction. | High |
E10High
Beko
Means a door lock jam or sensor issue, where the machine cannot detect that the door is securely closed. It is usually caused by the door lock, or by a water inlet, drainage, or motor control board malfunction.
E28High
Beko
Means a door lock mechanism failure, where the machine cannot confirm the door is securely closed. It is usually caused by the door lock, or by a water drainage issue keeping the door locked.
E9High
Beko
Means a door lock failure, where the machine cannot detect that the door is closed, latched, and locked properly. It is usually caused by a faulty door lock mechanism, a poor connection in the door circuit, or a failed control board.
E12High
Blomberg
Means the machine cannot detect that the door is securely closed, so it will not start a cycle or stops mid cycle. It is usually caused by a faulty lock, a wiring fault, or an obstruction.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needFlat head screwdriverScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- C00864814
- Alternative Part Numbers
- 2805310200
- Genuine Spare Part
- Yes
07
More Details
This is a genuine replacement door interlock.
Makes sure your washing machine door stays securely locked during cycles—so water stays in and everything runs safely.
Over time, the interlock mechanism can wear out or become faulty, leading to issues like the machine not starting, stopping mid-cycle, or the door failing to latch. If you’re experiencing any of these problems, it could be time for a replacement.
This washing machine door interlock is from Beko. It also fits Altus, Beko, Belling, Blomberg, Flavel, Grundig, Lamona, and Montpellier models.
Before ordering, please verify that this door lock works for your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Good product
Exactly what we needed. Fitted easily. No problems with it. Third time we've come to ransom spares for different parts. Will continue to use them.
J.W · Rossendale ·
Quality
Value
Ease of Fitting