Next Day Delivery Available
Hotpoint Washing Machine Drain Pump
Suitable For Models Of: Ariston, Creda, Hotpoint, Indesit, New World, Nordmende, Scholtes, Whirlpool Washing Machines Read More
Will This Part Fit My Appliance?
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
Description
What does a washing machine drain pump do?
A washing machine drain pump removes the dirty water out of the washing machine and into the drain hose or plumbing system. The drain pump is typically located at the bottom of the machine and is activated when the machine enters the drain cycle.
What causes a faulty drain pump?
A faulty washing machine drain pump can result from blockages caused by debris accumulation, wear and tear from continuous use. Electrical issues like faulty wiring or loose connections, foreign objects entering the pump also cause obstructions as well as motor-related problems such as burnt-out coils or mechanical failures.
These issues can impede water flow, reduce pump efficiency, and lead to poor drainage or complete failure of the drain pump.
How do you replace a damaged drain pump?
Watch our DIY video below on how to replace a washing machine drain pump.
This washing machine drain pump is a genuine Indesit washing machine spare part. It also fits Ariston, Creda, Hotpoint, Indesit, New World, Scholtes, and Whirlpool washing Machines.
How to Replace a Hotpoint Washing Machine Drain Pump Askoll
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
- Washing machine model used - Hotpoint NSWM743UWUK
Need to find a specific part of the video? Use the timestamps below...
- 0:22 - Removing existing drain pump
- 0:44 - Installing new drain pump
Specification:
- Genuine spare part
Manufacturers Part Number:
- C00855480
Alternative Part Numbers:
EAN Number:
- 8053190469869
Will this part fit your appliance?
Use our compatibility checker, Click here.
Finding your model number:
Struggling to find the model number on your Washing Machine? Click here.
Safety note:
Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.
Latest Product Review(s)
Pretty pumped about it, tbf
This was a like-for-like pump swap which fitted perfectly with no adjustment. Positioning and chassis fitment matched spot-on; so far so good. The only down-side was that the 2 pin connector from the washing machine (Hotpoint BHWD129UK | 104058681*80548650185) to the pump had to be replaced with two 0.8 x 6.35mm red insulated Female Spade Connectors, one for each lead in order to complete the installation. They obviously don't come with the pump. I had them on hand luckily, but many will not, so make sure you order some spade connectors and a crimping tool or see the look of disappointment on your wife's face when you tell her the machine can't be fixed today and she takes on the look of a woman scorned by terrible life choices. It being a Sunday and 4pm, B and Q are closed so there goes that idea. Once fitted, the pump was ridiculously quiet so on the plus side, the washing machine works like new and the missus showed her appreciation in the usual way by not having a go at me until the following morning.
Works but to adapt the wiring
This pump has now been in place for about 6 washes and is working well. It was easy to fit the 2 water pipes securely and the screwholes to hold it to the machine synched up. My only criticism is that the old pump had the 2 electrical wires going into a plastic block that then plugged into the pump. The new pump did not have the same socket, it has 2 spade connectors. I therefore had to cut off the plastic block and add crimped connectors to make a connection. There isn't a lot of spare wire to do this so some care is required. Soldering would work to if you don't have the crimp connector.
Virtually the same!!
We all need to apply ourselves, at times!! This part fitted virtually perfectly, but wasn't aware of the male and female connectors. Watched the video, and the pump was a great fit, and actually worked better than the original, but could have done with the heads up about the electrical fitting. This seems hypercritical, but a great solution to an, otherwise, expensive problem. Thank you Ransom
Good product fitted like a pump
Good product and a good price, relatively easy to install
Washing machine pump and cable set
Very professional all round. Went like clockwork. Items as stated, just exactly what I required. Thankyou
Good value part
Very quick delivery, from ordering to it arriving was less than 20 hours. Easy to fit after I had watched several how to videos online. Machine is now back to normal, no more sodden clothes!
Excellent
Finding the part on the website was easy, ordering was easy, fitting was easy.! Great value and great service.
Great product, easy to fit
Does what it says on the tin, washer is running smoother than ever, really easy to fit, never done it before. 2 screws and 2 c-clips and the job was done.
Indesit Waste water pump
Ordering was nice and easy. Part arrived by Royal Mail who were brilliant as usual. The pump was a direct replacement and was easy to fitted.
Excellent value
Got this item instead of going directly to Indesit. Excellent value and the same brand was fitted to my machine already from new. Simple to fit, took under 10 minutes, tipped the washer back slightly so I could reach it from underneath, 4 screws, twist it to remove, clip to remove the 2 pipes and the same in reverse to fit the new one. Recommend to anyone as mine has now run around 80 cycles and is still running perfectly.