AEG Washing Machine Motor 1600Rpm Sole

Suitable For Models Of: AEG, Arthur Martin, Bellavita, Curtiss, Domeos, Electrolux, Elektro Helios, Faure, Fors, Franke, Husqvarna Electrolux, Ikea, ... View All

5.0/5 Reviews | Questions

£83.75

Check This Part Fits Your Appliance

Usually despatched within 3 working days

Part No: RS242543

Choose your brand from the list below to check your model compatibility.

AEG, Arthur Martin, Bellavita, Curtiss, Domeos, Electrolux, Elektro Helios, Faure, Fors, Franke, Husqvarna Electrolux, Ikea, John Lewis, Juno, Kuppersbusch, Norland, Privileg, Rex, Rosenlew, Silentic, Tricity Bendix, Zanker, Zanussi, Zoppas Washing Machines

Manufacturers Part Number:

3792614012

Alternative Part Numbers:

1325297115
3792613303
3792614012

EAN Number:

7321420199901

Latest Product Review(s)

1 Customer Review(s)

Straightforward and quick to fit

When our Zanussi washing machine started to make screeching noises, I checked the obvious things, but it turned out to be that the coil part of the motor was slipping in the shaft that drives the belt. New motor needed. There were a few 'refurbished' motors available on websites, but I wanted to do this job just once. Ransome Spares have always been good before, so I went for a new motor. It wasn't cheap, but the replacement was an OEM Electrolux motor, so it should last OK. Modern machines have much better access than old ones and, apart from two of the mounting screws being a bit fiddly to reach, the job was done in half an hour. One tip, undo and dismount the old motor before trying to disconnect its electrics. It's easier when dismounted as you can get at the connector. NB: Always pull the mains plug out before doing any work. If the plug's out, you can see it's safe! Thanks again, Ransome Spares.

By Andy Brice - Llandovery

11th Mar 2021

Overall

Quality

Value

Ease of Fitting

Questions And Answers

1 Answer(s)

Do you possibly have the information or actually have the Brushes for a 12 yr old model 91460600100? I am already waiting for a heater Element and Interference Suppressor to arrive from yourselves. We have started getting RCD Trips. If those items don't work I would consider the motor brushes along with another good check round for other obvious problems before I give up.

By Matt - Gloucester - 12/03/2020

Hi Matt, we have a page on our site showing how to match up Zanussi, AEG and Electrolux washing machine carbon brushes. I'd recommend looking at this to be able to find the parts you require.

By Jordan - Staff Member

Ask a new question