AEG
AEG Washing Machine Belt 1196 J51323531200
Suitable for AEG, Acec, Arthur Martin, Atlas, Bellavita
Stock Code: 141564
£8.95inc. VAT
£7.46 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Transfers motor power to turn the drum.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E53 | AEG | Means a fault in the motor triac sensing circuit, so the motor cannot be controlled and the drum is prevented from spinning. It is usually caused by a motor, wiring, or main control board fault. | High |
| E50 | Electrolux | Means the motor has failed, often with the drum not turning or spinning. It is usually caused by a motor circuit issue, a faulty motor controller, motor overheating, or an overload. | High |
| E50 | Zanussi | Means a motor failure or motor-related fault, with the motor unable to drive the drum. It is usually caused by faulty motor carbon brushes, a broken belt, a failed motor, or a motor speed sensor tachometer fault. | High |
| E53 | Zanussi | Means a motor control circuit failure, specifically a fault with the motor triac sense circuit on the electronic PCB. It is usually caused by a damaged soldered link on the circuit board, a faulty motor, or wiring issues between them. | Medium |
| E54 | Zanussi | Means a motor-related fault where the motor is receiving power when it should be inactive, leading to issues with spinning or drum operation. It is usually caused by a motor relay contact sticking, low voltage being supplied to the motor, or a motor control circuit or PCB failure. | High |
E53High
AEG
Means a fault in the motor triac sensing circuit, so the motor cannot be controlled and the drum is prevented from spinning. It is usually caused by a motor, wiring, or main control board fault.
E50High
Electrolux
Means the motor has failed, often with the drum not turning or spinning. It is usually caused by a motor circuit issue, a faulty motor controller, motor overheating, or an overload.
E50High
Zanussi
Means a motor failure or motor-related fault, with the motor unable to drive the drum. It is usually caused by faulty motor carbon brushes, a broken belt, a failed motor, or a motor speed sensor tachometer fault.
E53Medium
Zanussi
Means a motor control circuit failure, specifically a fault with the motor triac sense circuit on the electronic PCB. It is usually caused by a damaged soldered link on the circuit board, a faulty motor, or wiring issues between them.
E54High
Zanussi
Means a motor-related fault where the motor is receiving power when it should be inactive, leading to issues with spinning or drum operation. It is usually caused by a motor relay contact sticking, low voltage being supplied to the motor, or a motor control circuit or PCB failure.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 1323531200
- Alternative Part Numbers
- 1108785005, 1240210607, 1240211506, 50226530009
- EAN / Barcode
- 7321429778701
- Genuine Spare Part
- Yes
07
More Details
What does a washing machine belt do?
The washing machine belt connects the motor and drum and allows the drum to rotate and agitate the clothing. It has outstanding grip and durability and gives dependable laundry performance.
How do I know if my washing machine belt is getting bad?
A malfunctioning belt causes any screeching or squealing sounds it makes while running, excessive vibrations, or a drum that spins unevenly or not at all.
Wear indicators like fraying, cracking, or stretching can be identified visually. If any of these symptoms are present, it may be time to think about changing the belt to get your washing machine back to working properly.
Is it easy to replace once damaged?
Yes. Check out or DIY video below on how to replace a washing machine belt.
This machine belt is a genuine AEG washing machine replacement part.
It also fits Acec, Arthur Martin, Atlas, Bellavita, Brandt, Castor, Curtiss, De Dietrich, Electrolux, Elektro Helios, Essentielb, FAR, Faure, Firenzi, Fors, Franke, Frigidaire, Horn, Husqvarna, Husqvarna Electrolux, Ikea, John Lewis, Juno, Kuppersbusch, Listo, Lloyds, Marijnen, Matura, Neue, Norland, Novamatic, Philco, Prima, Privileg, Professional, Rex, Rosenlew, Saba, Seppelfricke, Silentic, Therma, Tricity, Tricity Bendix, Wyss, Zanker, Zanussi, and Zoppas washing machines.
Specification:
Section: J5
Length: 1196mm
08
Video
How to replace a Washing Machine Belt:
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (9)
5.09 reviews
5
9
4
0
3
0
2
0
1
0
Sort by:||
Tumble dryer belt - philips
I bought this for a very old Philips AWB 699 tumble dryer. Good that it is still available. Was initially sent the wrong part but the error was resolved quickly by Ransom Spares using the chat line and follow up emails.
Jonathan Lord · Bristol ·
Quality
Value
Ease of Fitting
Exactly what It needs to be
Easy to find part, perfect replacement belt for my old washer. Fitting the belt was straight forward enough, getting to the belt on my specific machine however, was more time consuming that it ought to be. Part scores 10/10, awkward washing machine I give 2/10
Dan Robinson · Padiham ·
Quality
Value
Ease of Fitting
Fantastic value for mobey
Just over £10 with postage to fix my washer my husband wanted to throw away!!! Fantastic value for money, not that we use Domestic Appliance stores now a days, but they are well worth it!!! Hopefully get another couple of years out the washer now.
Alison Dunnington · Scarborough ·
Quality
Value
Ease of Fitting
Simple replacement
Great replacement part. Old part was slightly damaged, so thought best to replace at same time as drive pulley. Ransom exploded view made it easy to identify and order. Great service.
John Sheard · Horbury ·
Quality
Value
Ease of Fitting
Does what it says on the tin!
Another great quality product at a competitive price. Thank you
Gary Ward · Wakefield ·
Quality
Value
Ease of Fitting