Zanussi
Zanussi Tumble Dryer Door Lock Latch1250071006
Suitable for Zanussi, Acec, AEG, Arthur Martin, Atlas
Stock Code: 111184
£3.95inc. VAT
£3.29 ex. VAT
Usually dispatched in 5 working days
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Holds the door shut against its sprung catch while the dryer runs.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E40 | AEG | Means the door is not recognised as closed, preventing the cycle from starting. It is usually caused by an improperly closed door, laundry trapped in the seal, overloading, or a faulty door lock or sensor. | High |
| E45 | AEG | Means a failure in the door locking circuit, with defective triac sensing on the door delay system or a door closure sensor fault. It is usually caused by a faulty door lock, faulty wiring, or a fault on the main control PCB. | High |
| E4 | Electrolux | Means the door or lid is not properly closed or the lock is faulty. It is usually caused by trapped laundry, a damaged door seal, or a faulty door lock mechanism. | High |
| E40 | Electrolux | Means the door is not fully closed, is detected as open, or the locking mechanism has failed. It is usually caused by a faulty door lock switch or control board that may need replacing. | High |
| E40 | Zanussi | Means a door lock fault, signalling that the door is not sealing or locking properly. It is usually caused by an improperly closed door, an overloaded drum, or a faulty door lock mechanism. | High |
E40High
AEG
Means the door is not recognised as closed, preventing the cycle from starting. It is usually caused by an improperly closed door, laundry trapped in the seal, overloading, or a faulty door lock or sensor.
E45High
AEG
Means a failure in the door locking circuit, with defective triac sensing on the door delay system or a door closure sensor fault. It is usually caused by a faulty door lock, faulty wiring, or a fault on the main control PCB.
E4High
Electrolux
Means the door or lid is not properly closed or the lock is faulty. It is usually caused by trapped laundry, a damaged door seal, or a faulty door lock mechanism.
E40High
Electrolux
Means the door is not fully closed, is detected as open, or the locking mechanism has failed. It is usually caused by a faulty door lock switch or control board that may need replacing.
E40High
Zanussi
Means a door lock fault, signalling that the door is not sealing or locking properly. It is usually caused by an improperly closed door, an overloaded drum, or a faulty door lock mechanism.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 1250071006
- EAN / Barcode
- 7321420350241
- Genuine Spare Part
- Yes
07
More Details
Genuine door latch to keep your tumble dryer door closed. Made of plastic to withstand wear and tear during washing cycles. Has a tab to fit in the slot in your door assembly.
The door latch secures the tumble dryer door. The cycle won’t start if the door is open.
Helps keep you safe from the machine’s moving parts or exposure to hot air during the cycle. You get less water leaks too while drying your clothes.
This lock latch for your tumble dryer door is from Zanussi. You can also check other suitable brands from the list above.
Before ordering, please verify that this part fits your model using our compatibility checker.
08
Customer Reviews (2)
5.02 reviews
5
2
4
0
3
0
2
0
1
0
Works a treat
Didn't want to buy a new dryer and because I try and fix everything now, this was a perfect opportunity which worked well. Small part and so easy to take out and replace. Hey presto my dryer is now working perfectly. Not bad for an older female. I saved hundreds of pounds.
Vanessa H · Nottingham ·
Quality
Value
Ease of Fitting
Quick
That was easy change this part, and quick delivery from you. Thanks.
Olav Alme · Hafslo ·
Quality
Value
Ease of Fitting