Whirlpool
Whirlpool Tumble Dryer Thermostat481928248311
Suitable for Whirlpool, Admiral, Amana, Maytag
Stock Code: 134730
£46.00inc. VAT
£38.33 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Senses the air temperature and cuts the heater if it gets too hot.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F3 | Whirlpool | Means a temperature sensing fault or moisture sensor fault where the dryer cannot measure heat or dampness and stops to prevent overheating, shown as F3 E1, F3 E2, or F3 E3. It is usually caused by a faulty NTC thermistor or a faulty moisture sensor. | Medium |
| F4 | Whirlpool | Means a heating circuit fault or a low or no line voltage fault shown as F4E4, resulting in no heat or a failure to start. It is usually caused by a tripped circuit breaker, a faulty thermal fuse, a damaged heating element, or a clogged vent system. | Medium |
| F5 | Whirlpool | Means an NTC thermistor failure causing heating issues, or a door mechanism fault. It is usually caused by a faulty thermistor, a door fault, a blocked filter, or a very cold room restricting airflow. | Medium |
F3Medium
Whirlpool
Means a temperature sensing fault or moisture sensor fault where the dryer cannot measure heat or dampness and stops to prevent overheating, shown as F3 E1, F3 E2, or F3 E3. It is usually caused by a faulty NTC thermistor or a faulty moisture sensor.
F4Medium
Whirlpool
Means a heating circuit fault or a low or no line voltage fault shown as F4E4, resulting in no heat or a failure to start. It is usually caused by a tripped circuit breaker, a faulty thermal fuse, a damaged heating element, or a clogged vent system.
F5Medium
Whirlpool
Means an NTC thermistor failure causing heating issues, or a door mechanism fault. It is usually caused by a faulty thermistor, a door fault, a blocked filter, or a very cold room restricting airflow.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 481928248311
- Alternative Part Numbers
- C00311682, 481928248311
- EAN / Barcode
- 8015250032260
- Genuine Spare Part
- Yes