Whirlpool
Whirlpool Tumble Dryer Sump Pump And CoverC00627328
Suitable for Whirlpool, Ariston, Bauknecht, Hotpoint, Ignis
Stock Code: 891798
£38.15inc. VAT
£31.79 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Pumps the collected water up to the container or drain.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F11 | Ariston | Means the machine cannot detect the condensation pump, preventing water from being drained and often stopping the dryer after a few minutes. It is usually caused by a no pump connection or an open circuit pump fault. | High |
| F5 | Ariston | Means a drainage fault, often caused by lint buildup. It is usually caused by a blocked filter, an obstructed hose, or a malfunctioning drain pump. | High |
| H20 | Ariston | Means the machine cannot empty water from its reservoir, or the sensor detects a full tank when it is empty, causing the unit to stop mid-cycle. It is usually caused by a blocked pump, a dirty condenser unit, or a broken pump impeller. | High |
| F11 | Hotpoint | Means a pump circuit fault, where the pump is disconnected, blocked, or faulty and water is not pumping out. It is usually caused by an open circuit in the pump system. | High |
| F4 | Hotpoint | Means the pump is running when it should not be, suggesting a water drainage problem or a heater circuit fault. It is usually caused by moisture causing a short circuit in the pump circuit, or a clogged pump filter preventing proper drainage. | High |
| F5 | Hotpoint | Means a drainage problem where the pump is not working or a blockage is preventing water from draining. It is usually caused by a blocked filter, a clogged waste pipe, or a failed pump. | High |
| H20 | Hotpoint | Means a water drainage problem, signalling that the condenser water reservoir is full or that draining has failed. It is usually caused by a blocked drain pump, a blocked filter, debris accumulation, or a malfunctioning sensor. | High |
| F11 | Indesit | Means a pump circuit failure, where water is not being pumped out correctly on condenser or heat pump models. It is usually caused by a blockage in the filter, a faulty water pump, or a communication fault between the control boards. | High |
| F15 | Indesit | Means a dryer heater control fault or a drainage failure on washer-dryers, where the dryer cannot detect the heating element or water is not pumped out correctly. It is usually caused by a failed heating element, broken wires, or a blocked pump. | Medium |
F11High
Ariston
Means the machine cannot detect the condensation pump, preventing water from being drained and often stopping the dryer after a few minutes. It is usually caused by a no pump connection or an open circuit pump fault.
F5High
Ariston
Means a drainage fault, often caused by lint buildup. It is usually caused by a blocked filter, an obstructed hose, or a malfunctioning drain pump.
H20High
Ariston
Means the machine cannot empty water from its reservoir, or the sensor detects a full tank when it is empty, causing the unit to stop mid-cycle. It is usually caused by a blocked pump, a dirty condenser unit, or a broken pump impeller.
F11High
Hotpoint
Means a pump circuit fault, where the pump is disconnected, blocked, or faulty and water is not pumping out. It is usually caused by an open circuit in the pump system.
F4High
Hotpoint
Means the pump is running when it should not be, suggesting a water drainage problem or a heater circuit fault. It is usually caused by moisture causing a short circuit in the pump circuit, or a clogged pump filter preventing proper drainage.
F5High
Hotpoint
Means a drainage problem where the pump is not working or a blockage is preventing water from draining. It is usually caused by a blocked filter, a clogged waste pipe, or a failed pump.
H20High
Hotpoint
Means a water drainage problem, signalling that the condenser water reservoir is full or that draining has failed. It is usually caused by a blocked drain pump, a blocked filter, debris accumulation, or a malfunctioning sensor.
F11High
Indesit
Means a pump circuit failure, where water is not being pumped out correctly on condenser or heat pump models. It is usually caused by a blockage in the filter, a faulty water pump, or a communication fault between the control boards.
F15Medium
Indesit
Means a dryer heater control fault or a drainage failure on washer-dryers, where the dryer cannot detect the heating element or water is not pumped out correctly. It is usually caused by a failed heating element, broken wires, or a blocked pump.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliers
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- C00627328
- Alternative Part Numbers
- C00526697
- EAN / Barcode
- 8015250895834
- Genuine Spare Part
- Yes
07
More Details
This is a genuine sump pump and cover for your tumble dryer.
Helps remove excess moisture so there’s no water buildup. Plus, it plays a key role in preventing leaks or flooding, protecting both your dryer and your home.
Grinding or gurgling sounds from the sump area could suggest that the pump is struggling or clogged. Check for signs of wear, such as rust, corrosion, or physical damage on the pump or cover. Change it with this part.
This Hotpoint sump pump and cover is designed for your tumble dryer and also fits Indesit and Whirlpool models.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.