Whirlpool
Whirlpool Tumble Dryer Lint FilterC00526665
Suitable for Whirlpool, Ariston, Bauknecht, Hotpoint, Ignis
Stock Code: 889296
£17.95inc. VAT
£14.96 ex. VAT
In Stock
Next Day Delivery Available
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
What this part does
Traps fluff and lint from the air so it does not block the dryer.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F3 | Whirlpool | Means a temperature sensing fault or moisture sensor fault where the dryer cannot measure heat or dampness and stops to prevent overheating, shown as F3 E1, F3 E2, or F3 E3. It is usually caused by a faulty NTC thermistor or a faulty moisture sensor. | Medium |
| F4E3 | Whirlpool | Means a restricted or low airflow fault that can cause long drying times or overheating. It is usually caused by a clogged lint screen, a blocked vent hose, or crushed vent ducting. | Medium |
| F5 | Whirlpool | Means an NTC thermistor failure causing heating issues, or a door mechanism fault. It is usually caused by a faulty thermistor, a door fault, a blocked filter, or a very cold room restricting airflow. | Medium |
F3Medium
Whirlpool
Means a temperature sensing fault or moisture sensor fault where the dryer cannot measure heat or dampness and stops to prevent overheating, shown as F3 E1, F3 E2, or F3 E3. It is usually caused by a faulty NTC thermistor or a faulty moisture sensor.
F4E3Medium
Whirlpool
Means a restricted or low airflow fault that can cause long drying times or overheating. It is usually caused by a clogged lint screen, a blocked vent hose, or crushed vent ducting.
F5Medium
Whirlpool
Means an NTC thermistor failure causing heating issues, or a door mechanism fault. It is usually caused by a faulty thermistor, a door fault, a blocked filter, or a very cold room restricting airflow.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
- 1
- 2
- 3
- 4
- 5
06
Specifications
- Part Number
- C00526665
- EAN / Barcode
- 8015250750911
- Genuine Spare Part
- Yes
07
More Details
This is a genuine tumble dryer lint filter.
Lint, fibres, and other debris left behind by wet clothes are collected through a lint filter in a dryer. Has a fine screen mesh that traps these particles from the laundry during the drying.
If you see any rips, tears, or holes in the mesh, lint can pass through, and your filter isn’t as effective when you use it in the drying cycle. Change it with this replacement part.
This lint filter is from Hotpoint. It also fits Indesit and Whirlpool tumble dryers.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.