Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Neutral
Suitable for Neutral, Bauknecht, Erres, Ignis, KIC
Stock Code: 201478
£7.50 ex. VAT
Gives the motor the boost it needs to start and keep the drum turning.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F26 | Whirlpool | Means a motor control or communication failure between the main control board and the user interface. It is usually caused by an overloaded laundry load or wiring issues. | Medium |
Whirlpool
Means a motor control or communication failure between the main control board and the user interface. It is usually caused by an overloaded laundry load or wiring issues.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and discharge the capacitor before you start.
This is a genuine 8uF capacitor for your tumble dryer.
Gives your dryer a little extra boost when it starts up—like a kick-start—so the motor can get going without working too hard. It helps everything run more smoothly and efficiently throughout each cycle.
But like all electrical parts, it can wear out over time. If your dryer’s struggling to start or just isn’t running like it used to, the capacitor could be the culprit. Swap it out with this replacement part.
Check our video below on how to fit a new one.
This capacitor is from Neutral. It also fits Bauknecht, Erres, Ignis, KIC, Laden, Philips Whirlpool, Radiola, Thorn, and Whirlpool tumble dryers.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.