Hotpoint
Hotpoint Tumble Dryer Vent Hose Pipe Adaptor To DryerC00288486
Suitable for Hotpoint, Ariston, Creda, Indesit, Proline
Stock Code: 496245
£17.10inc. VAT
£14.25 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Connects the vent hose to the outlet duct.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F10 | Indesit | Means a failure in the pressure switch or water sensing system, where the pressure switch is not sensing correctly. It is usually caused by a faulty pressure sensor, damaged wiring, a blocked pressure hose, or a tripped heater thermostat. | Medium |
F10Medium
Indesit
Means a failure in the pressure switch or water sensing system, where the pressure switch is not sensing correctly. It is usually caused by a faulty pressure sensor, damaged wiring, a blocked pressure hose, or a tripped heater thermostat.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- C00288486
- Alternative Part Numbers
- 1703291, C00141697
- EAN / Barcode
- 8055005884867
- Genuine Spare Part
- Yes
07
Questions & Answers (2)
My dryer is branded as a T510VW. It's not on your compatibly list. Will it fit?
Robert · East Grinstead ·
Hi Robert, the adaptor for your model comes complete with the hose. This is part number RS3937.
JordanStaff·
what size hose is required with this
gary · northampton ·
Hi Gary, this adaptor is for a 4.1" diameter hose.
JordanStaff·