Hotpoint
Hotpoint Tumble Dryer Rear NTC ThermistorC00307622
Suitable for Hotpoint, Indesit, Swan
Stock Code: 601460
£16.35inc. VAT
£13.63 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Measures the drying air temperature so the cycle runs at the right heat.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E2 | Hotpoint | Means a serious heating fault that causes the dryer to overheat or fail to heat. It is usually caused by a faulty thermistor, a broken heating element, or a control board issue. | High |
| F3 | Hotpoint | Means a temperature sensing fault, where the dryer cannot properly monitor drum temperature, often resulting in no heat or the machine stopping prematurely. It is usually caused by a faulty front thermistor, damaged sensor wiring, or a faulty control board. | High |
| F13 | Indesit | Means a dryer temperature sensing fault on the NTC thermistor in the heater assembly. It is usually caused by a faulty or disconnected thermistor, or overheating from a blockage. | High |
E2High
Hotpoint
Means a serious heating fault that causes the dryer to overheat or fail to heat. It is usually caused by a faulty thermistor, a broken heating element, or a control board issue.
F3High
Hotpoint
Means a temperature sensing fault, where the dryer cannot properly monitor drum temperature, often resulting in no heat or the machine stopping prematurely. It is usually caused by a faulty front thermistor, damaged sensor wiring, or a faulty control board.
F13High
Indesit
Means a dryer temperature sensing fault on the NTC thermistor in the heater assembly. It is usually caused by a faulty or disconnected thermistor, or overheating from a blockage.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- C00307622
- EAN / Barcode
- 8058331076227
- Genuine Spare Part
- Yes
07
More Details
This is a genuine rear NTC thermistor for your tumble dryer’s heater.
When the temperature gets too high, the thermistor ensures the heater shuts off, preventing overheating and protecting your dryer from damage. Also helps adjust heat levels based on the drying cycle you’ve selected.
Clothes coming out damp or overly dry? A damaged thermistor might be sending incorrect temperature readings. Change it with this replacement part.
This tumble dryer rear NTC thermistor is from Hotpoint. It also fits models of Indesit and Swan tumble dryers.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Thermistor
Fast delivery, easy to fit and effective repair once fault identified as no mention of this being a potential cause of the dryer blowing cold air in your usually detailed DIY repair section - an OFI perhaps?
Ian McComb · Wells ·
Quality
Value
Ease of Fitting