Hotpoint
Hotpoint Tumble Dryer Heater Element 2050wC00282400
Suitable for Hotpoint, Indesit
Stock Code: 495559
·
£32.50inc. VAT
£27.08 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E2 | Hotpoint | Means a serious heating fault that causes the dryer to overheat or fail to heat. It is usually caused by a faulty thermistor, a broken heating element, or a control board issue. | High |
| F8 | Hotpoint | Means a heating circuit fault, where the heating element is energised when it should not be. It is usually caused by a faulty thermostat, thermal cut-out, or a malfunctioning control board. | High |
| F14 | Indesit | Means a heating circuit fault, specifically that the heating element is not activating. It is usually caused by a faulty heating element, a tripped thermostat, or faulty wiring or control board. | High |
| F4 | Indesit | Means a serious heating circuit fault that leaves the dryer producing no heat, usually within 3 to 5 minutes of operation. It is usually caused by a failed thermostat, a heating element, or a blocked airflow system causing overheating. | High |
| F8 | Indesit | Means a heater fault that pauses the cycle partway through. It is usually caused by a heater relay fault, a shorted or open heating element, or wiring damage. | High |
E2High
Hotpoint
Means a serious heating fault that causes the dryer to overheat or fail to heat. It is usually caused by a faulty thermistor, a broken heating element, or a control board issue.
F8High
Hotpoint
Means a heating circuit fault, where the heating element is energised when it should not be. It is usually caused by a faulty thermostat, thermal cut-out, or a malfunctioning control board.
F14High
Indesit
Means a heating circuit fault, specifically that the heating element is not activating. It is usually caused by a faulty heating element, a tripped thermostat, or faulty wiring or control board.
F4High
Indesit
Means a serious heating circuit fault that leaves the dryer producing no heat, usually within 3 to 5 minutes of operation. It is usually caused by a failed thermostat, a heating element, or a blocked airflow system causing overheating.
F8High
Indesit
Means a heater fault that pauses the cycle partway through. It is usually caused by a heater relay fault, a shorted or open heating element, or wiring damage.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- C00282400
- EAN / Barcode
- 8055005824009
- Genuine Spare Part
- Yes
07
More Details
This is a genuine 2050W tumble dryer heater element. It’s at the back of your dryer’s housing. Has a wiring harness to connect to your dryer’s control system.
The heater element produces the heat circulated in the drying chamber. This heat evaporates moisture from your damp laundry including shirts, towels, and other items inside the dryer.
If the heating element isn't working properly, the dryer will still spin and the cycle will complete, but it won't get hot enough to help dry the clothes. Change it with this replacement part.
This heater element is from Hotpoint but also fits select models of Indesit tumble dryers.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (4)
5.04 reviews
5
4
4
0
3
0
2
0
1
0
Heater Element
The part was the right one & it works brilliantly. Will definitely use Ransom spares again.
Kathleen Orrey · Selby ·
Quality
Value
Ease of Fitting
Easy fit product
Arrived on time easy to fit and most important did everything it said on website
Alexander MacLeod · Perth ·
Quality
Value
Ease of Fitting
Great product
Having multiple elements for my dryer l got this one for an excellent price and fast delivery.
George · Manchester ·
Quality
Value
Ease of Fitting
Fast delivery, great value, easy to fit.
Really good customer service. Orginal parts at great prices. Recommend Ranson Spares to anything.
Stephen Sangster · Northampton ·
Quality
Value
Ease of Fitting
09
Questions & Answers (2)
Does this part include themostats
Dave · Newbiggin by the sea ·
Hi Dave, I can confirm this element has two thermostats attached.
JordanStaff·
Will this sort my idisit tumble dryer model number idc8t3buk as it's not heating up I took casing of where heater is and turned it on but no glow of heater
Barry · Dundee ·
Hi Barry, the manufacturers changed the heaters during production on this model. If you can provide us with the serial number via our part type enquiry form, we can identify the correct part for you.
SamStaff·