Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Hotpoint
Suitable for Hotpoint, Ariston, Creda, Crusader, Export
Stock Code: 388270
£9.50 ex. VAT
Gives the motor the boost it needs to start and keep the drum turning.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F2 | Ariston | Means a motor circuit fault where the drum stops turning and the cycle does not complete. It is usually caused by a jammed drum, a faulty motor capacitor, or a broken motor circuit. | High |
| F2 | Indesit | Means a motor circuit fault that stops the drum rotating or starting. It is usually caused by a motor jam, a faulty motor capacitor, or a broken drum belt. | High |
Ariston
Means a motor circuit fault where the drum stops turning and the cycle does not complete. It is usually caused by a jammed drum, a faulty motor capacitor, or a broken motor circuit.
Indesit
Means a motor circuit fault that stops the drum rotating or starting. It is usually caused by a motor jam, a faulty motor capacitor, or a broken drum belt.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and discharge the capacitor before you start.
The capacitor releases its stored energy when the tumble dryer's motor is turned on, creating a rush of power. This additional power aids in getting the motor going by overcoming its initial resistance and inertia.
Once the motor has started, the capacitor keeps supplying a steady power source to ensure smooth performance.
A dryer capacitor has a finite lifespan, just like any other electronic component. It might endure normal wear and tear over time, which could cause a deterioration in function and lead to failure.
The capacitor may overheat due to excessive heat created inside the dryer from continuous use, inadequate ventilation, or defective parts. High temperatures can cause the dielectric material to deteriorate, which can cause the capacitor to break down or lose capacitance.
Watch our demo video below on how to fit a tumble dryer capacitor.
This capacitor by Hotpoint is a genuine tumble dryer replacement part. It also fits Ariston, Creda, Crusader, Export, Indesit, and Proline tumble dryers.
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
Tumble dryer stopped working. Drum not rotating and buzzing from motor. Diagnosed by looking online as the motor capacitor. It is a Hoover condenser dryer and the designers clearly had no concept of designed mg for repair. Capacitor buried right at the back with no access to change apart from a complete dismantling of the machine. Fortunately saw a comment where someone had managed to change the capacitor with difficulty without total stripdown and followed his instructions which worked. Once changed them worked perfectly so a simple fixe was f it wasn’t for access.
Many thanks Ransomspares, there advice and supply of these Capacitors saved me around £600 as i was going to be purchasing a new tumble dryer. A throw away society goes against the grain with me. Ransomespares and there stock could potentially save an absolute fortune in renewable items instead of repair. Thank you, be seeing you again im sure.
Found the part on line, cheap although deliver wasn’t and arrived quick
The tumble dryer had started being reluctant to start and after watching the video I concluded I needed a new capacitor. This arrived promptly, although I didn't fit it immediately as the dryer appeared to be working for a week or so, but then started misbehaving again. Thanks to the video I was able to get at the part, but whoever designed the machine in the first place obviously didn't have ease of replacing the capacitor at the top of their agenda, for you have to take a fair bit of the machine (Hotpoint) to bits to get at it. One video suggested taking the drum out as well to get at the capacitor, but I was reluctant do this and after a bit of fiddling about, guided by feel rather than sight, I was able to replace the part which had two spades rather than four, but the video indicated this was not a problem. Putting it all back together, the machine started perfectly and has continued to do so. So a cheap but rather fiddly repair, but accomplished thanks to the useful video.
Tumble dryer needed help to start turning. Replacement capacitor makes the motor to start smoothly : satisfied customer (wife)
Hi , I have a candy condenser dryer , model csc8df-80, it's not on your list of capatable devices ? But the one I need is 7uf , 416.33.20. Is this the exact one you are selling? Thanks
Hi Wayne, I can confirm this is the capacitor as shown in the image.
Could you tell me if this capacitor is a genuine Ducati one as pictured, please? I'm struggling to find an exact match to the one for my Candy tumble dryer which is almost identical to the one you have pictures apart from on the side of the one you have pictures it's printed W06/18 and mine is W27/16. Not sure if this makes a difference or not? Thanks
Hi Dean, I can confirm this will be the genuine Ducati capacitor as per the image.