Hoover
Hoover Tumble Dryer Heater & Thermostat41042962
Suitable for Hoover, Candy
Stock Code: 741100
·
£37.55inc. VAT
£31.29 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E15 | Candy | Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system. | High |
| E2 | Candy | Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter. | High |
| E21 | Candy | Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor. | High |
| E5 | Candy | Means a heating failure, where the dryer detects that the air is not heating properly and stops the cycle for safety. It is usually caused by a faulty NTC temperature sensor, a damaged heating element, or a malfunctioning control board. | High |
| E15 | Hoover | Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor. | High |
| E8 | Hoover | Means a heating circuit fault or the thermal cut-out fuse has tripped due to overheating. It is usually caused by restricted airflow from blocked filters, a clogged condenser, or a faulty heating element. | High |
E15High
Candy
Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system.
E2High
Candy
Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter.
E21High
Candy
Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor.
E5High
Candy
Means a heating failure, where the dryer detects that the air is not heating properly and stops the cycle for safety. It is usually caused by a faulty NTC temperature sensor, a damaged heating element, or a malfunctioning control board.
E15High
Hoover
Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor.
E8High
Hoover
Means a heating circuit fault or the thermal cut-out fuse has tripped due to overheating. It is usually caused by restricted airflow from blocked filters, a clogged condenser, or a faulty heating element.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 41042962
- Alternative Part Numbers
- 40005010, 40007271, 41039691
- EAN / Barcode
- 8032768240802
- Genuine Spare Part
- Yes
07
More Details
How do heaters and thermostats regulate temperature in washing machines?
Heaters and thermostats play a vital role in the temperature control of your tumble dryer. The heater element generates the heat necessary to dry your clothes effectively, while the thermostats monitor and regulate the temperature to prevent overheating. The heater's metal housing includes coils within the heater and electrical connectors which help run power to the heater and sensors.The wires are also protected by a sleeving and grommet to prevent heat damage.They work in tandem to ensure the dryer operates at the right temperature for different fabric types and drying settings.
When do they need to get replaced?
Over time, heaters and thermostats may need to be replaced due to wear and tear or component failure. Common signs include the dryer not heating up properly, inconsistent temperature levels, or prolonged drying times. If you notice any of these issues, consider replacing the heater and thermostats to restore optimal drying performance.
Would this fit in my tumble dryer?
These heaters and thermostat suit Candy and Hoover tumble dryers. Use our compatibility checker to see if this part fits your model.
08
Customer Reviews (50)
5.050 reviews
5
48
4
2
3
0
2
0
1
0
Sort by:||
Heating Element
Good product Generated good heat for the dryer Will buy again if required
David Lee · Fulwood ·
Quality
Value
Ease of Fitting
good quality
very easy to change it straight away. recommend.!
Jeff zha · Coventry ·
Quality
Value
Ease of Fitting
Heating Element
Good product. easy to fit and works perfectly . Will buy again if required
David Lee · Fulwood ·
Quality
Value
Ease of Fitting
Great product
Great product but unfortunately I ordered the wrong part and couldn’t fit it. After an extremely helpful online chat I was provided with details of the correct part which I then ordered and was again an excellent product and was easy to fit. I was able to return the original part. Was an excellent service
Helen Niles · Altrincham ·
Quality
Value
Ease of Fitting
Just the job
Correct part to repair hoover tumble dryer, simple to fit. Quick delivery, thank you
James Webb · Leicester ·
Quality
Value
Ease of Fitting
09
Questions & Answers (10)
Sort by:|
Does this fit the model with Serial: 3110088517370151 and Model: DX C8TCEB-80?
Rob · Wales ·
Hi Rob, I can confirm this is the correct heater element for your model.
JordanStaff·
Hi, will this fit the following Hoover tumble dryer? Serial: 3110088517370151 Model: DX C8TCEB-80
Rob · Wales ·
Hi Rob, I can confirm this is the correct heater element for your model.
JordanStaff·
Does this part fit a hoover tumble dryer mod.HL C8LGB-80 N. 3110087420260008
Martin · Kilmarnock ·
Hi Martin, the heater element required for your model is RS905428.
JordanStaff·
Does this element fit a candy dryer model: CS C8LF-80 Serial: 3110090419460077
Peter · Colne ·
Hi Peter, the heater element required for your model is RS905428.
JordanStaff·
Hi there, is the element compatible with my hoover tumble dryer 3110072516090389 DNC D813BB-80
Ian · Glasgow ·
Hi Ian, thanks for your message. I can confirm this is the correct heater element for your model.
JordanStaff·