Hoover
Hoover Tumble Dryer Heater Element41042959
Suitable for Hoover, Candy
Stock Code: 905429
£68.10inc. VAT
£56.75 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E15 | Candy | Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system. | High |
| E2 | Candy | Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter. | High |
| E21 | Candy | Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor. | High |
| E5 | Candy | Means a heating failure, where the dryer detects that the air is not heating properly and stops the cycle for safety. It is usually caused by a faulty NTC temperature sensor, a damaged heating element, or a malfunctioning control board. | High |
| E15 | Hoover | Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor. | High |
| E8 | Hoover | Means a heating circuit fault or the thermal cut-out fuse has tripped due to overheating. It is usually caused by restricted airflow from blocked filters, a clogged condenser, or a faulty heating element. | High |
E15High
Candy
Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system.
E2High
Candy
Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter.
E21High
Candy
Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor.
E5High
Candy
Means a heating failure, where the dryer detects that the air is not heating properly and stops the cycle for safety. It is usually caused by a faulty NTC temperature sensor, a damaged heating element, or a malfunctioning control board.
E15High
Hoover
Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor.
E8High
Hoover
Means a heating circuit fault or the thermal cut-out fuse has tripped due to overheating. It is usually caused by restricted airflow from blocked filters, a clogged condenser, or a faulty heating element.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 41042959
- EAN / Barcode
- 8032768172790
- Genuine Spare Part
- Yes
07
More Details
This is a genuine tumble dryer heater element. Has wires to connect it to your dryer’s control system.
The heater element produces the heat circulated in the drying chamber. This heat evaporates moisture from your damp laundry including shirts, towels, and other items inside the dryer.
If the heating element isn't working properly, the dryer will still spin and the cycle will complete, but it won't get hot enough to help dry the clothes. Change it with this replacement part.
This heater element is from Hoover but also fits select models of Candy tumble dryers.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Questions & Answers (2)
HI I have Hoover VL V9LG-80 with serial NO 31100864 18280062. Which heating element fits this model ,there 2 elements advertised?
baiju · kettering ·
Hi Baiju, I can confirm this is the correct heater element for your model.
JordanStaff·
Hi I have the Candy CS V9LF 80 SN 3110090219460035 the heating element has gone you advertise 2 which one is compatible thanks
Donna · Dudley ·
Hi Donna, the heater element required for your model is RS905422.
JordanStaff·