Creda
Creda Tumble Dryer BeltC00109620
Suitable for Creda, Ariston, Crusader, Electra, Export
Stock Code: 4937
£7.40inc. VAT
£6.17 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Transfers motor power to turn the drum.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F7 | Hotpoint | Means a fault within the heating circuit or the electronic control board. It is usually caused by the heating circuit or control board, though on some models the drum is not rotating due to a snapped belt or faulty motor. | Medium |
| F2 | Indesit | Means a motor circuit fault that stops the drum rotating or starting. It is usually caused by a motor jam, a faulty motor capacitor, or a broken drum belt. | High |
F7Medium
Hotpoint
Means a fault within the heating circuit or the electronic control board. It is usually caused by the heating circuit or control board, though on some models the drum is not rotating due to a snapped belt or faulty motor.
F2High
Indesit
Means a motor circuit fault that stops the drum rotating or starting. It is usually caused by a motor jam, a faulty motor capacitor, or a broken drum belt.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- C00109620
- Alternative Part Numbers
- 1702342
- EAN / Barcode
- 8052476096201
- Genuine Spare Part
- Yes
07
More Details
This is a genuine tumble dryer belt. Has a section of H5 and is 1540 mm long.
Keeps the drum rotating smoothly. It transfers the power and motion of the engine to the drum. The dryer's motor moves the belt when it is turned on and spins the drum. The rotating motion efficiently dries the clothing by dispersing hot air throughout it.
If you're hearing squeals, screeching noises, or noticing the drum isn’t spinning properly—or at all—it could be a worn-out belt. Just swap it with this replacement part.
Check our video below on how to fit a new one.
This tumble dryer belt is from Creda. Also fits Ariston, Crusader, Electra, Export, Hotpoint, Indesit, and Swan models.
Before ordering, please verify that this fits your model using our compatibility checker.
Please note that this belt is serial number dependent.
08
Video
How to Fit a Tumble Dryer Belt
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (2)
4.52 reviews
5
1
4
1
3
0
2
0
1
0
Good product
Good product was not easy to fit as need to put a lot of Force him to pull it over on to the motor
Thomas Moran · Stockport ·
Quality
Value
Ease of Fitting
Fan belt
Good service, seems to be decent product - only been fitted a few days, only downside was that it took about 4 days to arrive.
Nicki paul · North walsham ·
Quality
Value
Ease of Fitting