Candy
Candy Tumble Dryer Thermostat41037151
Suitable for Candy, De Dietrich, Geratek, Hoover, Otsein-Hoover
Stock Code: 753148
£14.85inc. VAT
£12.38 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Senses the air temperature and cuts the heater if it gets too hot.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E15 | Candy | Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system. | High |
| E2 | Candy | Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter. | High |
| E21 | Candy | Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor. | High |
| E15 | Hoover | Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor. | High |
E15High
Candy
Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system.
E2High
Candy
Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter.
E21High
Candy
Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor.
E15High
Hoover
Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 41037151
- EAN / Barcode
- 8032767798281
- Genuine Spare Part
- Yes
07
More Details
Genuine thermostat to regulate your tumble dryer’s drying temperature. Made of stainless steel to withstand the heat generated during the drying cycle.
Notice your tumble dryer's heat fluctuating? Might be with your dryer's thermostat.
The thermostat keeps an eye on the temperature inside your tumble dryer so it doesn't get too hot and causes any damage to your clothes and the dryer itself. Automatically cuts off the heating element if it overheats.
This thermostat for your tumble dryer is from Candy. Also fits De Dietrich, Geratek, Hoover, Otsein-Hoover, Rosieres, Silverline, and Terzismo tumble dryers.
Before ordering, please verify with our compatibility checker that this kit works for your model.