Candy
Candy Tumble Dryer Sponge Air Filter Plastic Frame70067618
Suitable for Candy, Baumatic, Caple, Geratek, Haier
Stock Code: 915694
£18.70inc. VAT
£15.58 ex. VAT
In Stock
Next Day Delivery Available
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
What this part does
Catches the fine fluff that gets past the main filter before it reaches the condenser.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E7 | Candy | Means insufficient or restricted airflow. It is usually caused by a clogged filter, a blocked condenser, a jammed drum, a faulty sensor, or a motor or heating fault. | High |
| E3 | Haier | Means a drying failure, where clothes are still damp at the end of the cycle from a lack of heat or poor airflow. It is usually caused by a dirty lint filter, blocked venting, or an overloaded drum. | Medium |
| E6 | Haier | Means a vent duct blockage on condenser models, or a water drainage or sensor fault, where the machine is not exhausting air properly or cannot empty water. It is usually caused by a dirty lint filter, a clogged condenser, or a kinked drain hose. | High |
| E1 | Hoover | Means a time out fault where the dryer has failed to heat, fill, or drain within a set time. It is usually caused by a heavily clogged lint filter, a blocked condenser unit, or faulty NTC temperature sensors. | Medium |
| E7 | Hoover | Means a poor airflow issue. It is usually caused by blocked filters or a clogged condenser unit, with obstructions in the vent hose or an overloaded machine contributing. | High |
E7High
Candy
Means insufficient or restricted airflow. It is usually caused by a clogged filter, a blocked condenser, a jammed drum, a faulty sensor, or a motor or heating fault.
E3Medium
Haier
Means a drying failure, where clothes are still damp at the end of the cycle from a lack of heat or poor airflow. It is usually caused by a dirty lint filter, blocked venting, or an overloaded drum.
E6High
Haier
Means a vent duct blockage on condenser models, or a water drainage or sensor fault, where the machine is not exhausting air properly or cannot empty water. It is usually caused by a dirty lint filter, a clogged condenser, or a kinked drain hose.
E1Medium
Hoover
Means a time out fault where the dryer has failed to heat, fill, or drain within a set time. It is usually caused by a heavily clogged lint filter, a blocked condenser unit, or faulty NTC temperature sensors.
E7High
Hoover
Means a poor airflow issue. It is usually caused by blocked filters or a clogged condenser unit, with obstructions in the vent hose or an overloaded machine contributing.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
- 1
- 2
- 3
- 4
- 5
06
Specifications
- Part Number
- 70067618
- Alternative Part Numbers
- 40006730
- EAN / Barcode
- 8032767865778
- Genuine Spare Part
- Yes
07
More Details
This is a genuine sponge air filter plastic frame for your tumble dryer. This frame provides security for your sponge filter, keeping your sponge filter safely in place.
Catches lint and debris to keep your dryer running smoothly. It also helps prevent clogs in the vents, making sure everything works efficiently and safely.
If you find that lint builds up quickly on the filter or if it feels overly dense, this could indicate that it’s clogged. Change it with this replacement part.
This tumble dryer sponge air filter is from Candy. You can also check other suitable brands from the list above.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.