Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Candy
Suitable for Candy, Hoover, Hoover-Helkama, Ostein, Otsein-Hoover
Stock Code: 133267
£18.88 ex. VAT
Senses the air temperature and cuts the heater if it gets too hot.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E15 | Candy | Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system. | High |
| E2 | Candy | Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter. | High |
| E21 | Candy | Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor. | High |
| E15 | Hoover | Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor. | High |
Candy
Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system.
Candy
Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter.
Candy
Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor.
Hoover
Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
As always, great service, product delivered quickly.
Great product very easy to fit. Very happy with it.
Part as expected easy to fit arrived quickly good value.
I ordered this part to replace the old one on my machine by phone. The man I spoke to was very helpful, and it wasn't a hassle to confirm it was the correct part for my machine. He informed me when it would be in stock and then how long it would take to be delivered accurately. Once it arrived it was very easy to swap the parts over. I have ordered both online and by phone different parts and never had any issues.
Part arrived very quickly which allowed me to get the tumble drier back into operation in only a few days.