Candy
Candy Tumble Dryer Printed Control Board49039350
Suitable for Candy
Stock Code: 906759
£116.85inc. VAT
£97.38 ex. VAT
Usually despatched within 5 working days
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Runs the dryer's programmes and controls the motor, heater and sensors.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E10 | Candy | Means a missing load or empty drum, where the sensor does not detect wet clothes, and on washer-dryers a water inlet valve fault during the drying cycle. It is usually caused by an overloaded drum, laundry that is too dry, or a faulty sensor. | Medium |
| E4 | Candy | Means a fault with the program selector switch, where the machine cannot read the selected cycle. It is usually caused by a faulty selector switch or control module. | Medium |
| E6 | Candy | Means a Main Control Unit or circuit board fault in the electronic component that manages the motor or program cycles. It is usually caused by a faulty control board. | Medium |
E10Medium
Candy
Means a missing load or empty drum, where the sensor does not detect wet clothes, and on washer-dryers a water inlet valve fault during the drying cycle. It is usually caused by an overloaded drum, laundry that is too dry, or a faulty sensor.
E4Medium
Candy
Means a fault with the program selector switch, where the machine cannot read the selected cycle. It is usually caused by a faulty selector switch or control module.
E6Medium
Candy
Means a Main Control Unit or circuit board fault in the electronic component that manages the motor or program cycles. It is usually caused by a faulty control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 49039350
- EAN / Barcode
- 8032768242479
- Genuine Spare Part
- Yes
07
More Details
This is a genuine PCB replacement for your tumble dryer.
Lets you choose from a range of drying programs tailored for different fabrics and laundry loads—whether it’s delicate items, heavy towels, or activewear, there’s a setting to match. It controls the cycle, monitors temperature, and ensures everything runs smoothly from start to finish.
If the buttons stop working, the display goes blank, the dryer shuts off unexpectedly, or it doesn't complete cycles, the control board could be the culprit. You should replace it with this part.
This tumble dryer PCB only fits a Candy model.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.