Candy
Candy Tumble Dryer Heater Element40017149
Suitable for Candy, Hoover, Terzismo
Stock Code: 1033322
£57.60inc. VAT
£48.00 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E15 | Candy | Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system. | High |
| E2 | Candy | Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter. | High |
| E21 | Candy | Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor. | High |
| E5 | Candy | Means a heating failure, where the dryer detects that the air is not heating properly and stops the cycle for safety. It is usually caused by a faulty NTC temperature sensor, a damaged heating element, or a malfunctioning control board. | High |
| E15 | Hoover | Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor. | High |
| E8 | Hoover | Means a heating circuit fault or the thermal cut-out fuse has tripped due to overheating. It is usually caused by restricted airflow from blocked filters, a clogged condenser, or a faulty heating element. | High |
E15High
Candy
Means a heating circuit fault, or water accumulation in the base tray triggering a safety sensor, which stops the dryer heating. It is usually caused by a failed heating element, a faulty thermostat, or a blocked water drainage system.
E2High
Candy
Means a thermal fuse or heating circuit failure from overheating, with some models triggering it when run empty above the temperature limit. It is usually caused by a faulty thermostat, a broken heating element, or a blocked filter.
E21High
Candy
Means a heating system failure that has stopped the dryer heating and shut it down for safety. It is usually caused by a tripped safety thermostat, a broken heating element, or a faulty NTC sensor.
E5High
Candy
Means a heating failure, where the dryer detects that the air is not heating properly and stops the cycle for safety. It is usually caused by a faulty NTC temperature sensor, a damaged heating element, or a malfunctioning control board.
E15High
Hoover
Means a heating system failure or a water leak in the base triggering the flood sensor. It is usually caused by a faulty element, a faulty thermostat, or a leak reaching the flood sensor.
E8High
Hoover
Means a heating circuit fault or the thermal cut-out fuse has tripped due to overheating. It is usually caused by restricted airflow from blocked filters, a clogged condenser, or a faulty heating element.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 40017149
- EAN / Barcode
- 8057166898721
- Genuine Spare Part
- Yes