Candy
Candy Tumble Dryer Electronic Control PCB with NFC49039504
Suitable for Candy
Stock Code: 906765
£117.95inc. VAT
£98.29 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Runs the dryer's programmes and controls the motor, heater and sensors.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E10 | Candy | Means a missing load or empty drum, where the sensor does not detect wet clothes, and on washer-dryers a water inlet valve fault during the drying cycle. It is usually caused by an overloaded drum, laundry that is too dry, or a faulty sensor. | Medium |
| E4 | Candy | Means a fault with the program selector switch, where the machine cannot read the selected cycle. It is usually caused by a faulty selector switch or control module. | Medium |
| E6 | Candy | Means a Main Control Unit or circuit board fault in the electronic component that manages the motor or program cycles. It is usually caused by a faulty control board. | Medium |
E10Medium
Candy
Means a missing load or empty drum, where the sensor does not detect wet clothes, and on washer-dryers a water inlet valve fault during the drying cycle. It is usually caused by an overloaded drum, laundry that is too dry, or a faulty sensor.
E4Medium
Candy
Means a fault with the program selector switch, where the machine cannot read the selected cycle. It is usually caused by a faulty selector switch or control module.
E6Medium
Candy
Means a Main Control Unit or circuit board fault in the electronic component that manages the motor or program cycles. It is usually caused by a faulty control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 49039504
- EAN / Barcode
- 8032768248808
- Genuine Spare Part
- Yes
07
More Details
This is a genuine electronic control PCB with NFC for your tumble dryer.
Manages the dryer's functions. It controls settings, programs, and operations by processing input and executing commands.
Easy to install. Position the new PCB in place and secure it with screws or clips as needed.
You might notice visible cracks, burn marks, or loose connections on the electronic control PCB. The dryer may also show erratic behaviour or fail to respond to settings if the PCB is damaged. Change it with this replacement part.
This electronic control PCB with NFC is from Candy.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Excellent!
Product described well with clear picture. Arrived promptly and well packaged. Looked at other sites for this product but this company had best price. Dealing with the company was excellent as well. Will certainly use Random Spares again and would reccomend to all.
Mr Bryan Messer · Swansea ·
Quality
Value
Ease of Fitting