Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Candy
Suitable for Candy, Baumatic, Edesa, Fagor, Haier
Stock Code: 133317
£13.33 ex. VAT
Confirms the door is shut so the cycle is allowed to run.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E1 | Haier | Means the machine cannot drain water within a set time or has a door sensing issue. It is usually caused by a full water tank, a clogged lint filter or drain pump, kinked hoses, or a door not firmly closed. | Medium |
| E2 | Haier | Means the dryer is not reaching temperature or cannot lock the door to start the cycle. It is usually caused by a faulty heating element, thermistor, or door switch. | Medium |
Haier
Means the machine cannot drain water within a set time or has a door sensing issue. It is usually caused by a full water tank, a clogged lint filter or drain pump, kinked hoses, or a door not firmly closed.
Haier
Means the dryer is not reaching temperature or cannot lock the door to start the cycle. It is usually caused by a faulty heating element, thermistor, or door switch.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
This is a genuine lock switch for your tumble dryer.
The lock switch keeps your tumble dryer closed during spinning cycles. A safety measure so you won’t get injured while drying your clothes.
It also acts as a control signal when the door is not securely closed. When it’s properly closed, it sends out a signal that it’s safe to start the cycle. And when it’s loose or still open, it senses the location of the door coupler or latch and alerts the dryer's control system to stop working.
This lock switch for your tumble dryer is from Candy. Also fits Edesa, Fagor, Hoover, Hoover-Helkama, Lacasa, Ostein, Otsein-Hoover, Teka, Vestel, and Zerowatt tumble dryers.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
Not the easiest of replacements but straightforward enough: Take off top Take off control panel Undo screws on the front so that you can pull away the front where the catch is undo screw holding catch pull catch out of gap take off cables The catch actually has two orientations depending on which side your door is swung, therefore, like me, you may need to take out the little microswitch where the electric hooks up and move it to match the one you just took off. Fiddly but easy enough. Reverse the above and test. Happy days.
Glad to find the part needed to save buying a new tumble dryer.
Definitely recommend and would definitely order any parts from this company
The original switch had failed due to overheating. It was charred and partially melted. The replacement was easy to locate on the Ransome Spares website and it arrived promptly. At £8.85 it was good value for money I thought. The Candy / Hoover dryer is reasonably easy to dissasemble once you know how it comes apart. Once the front panel has been removed replacing the switch is easy.
The part arrived promptly and fitted correctly into the door mechanism. The tumble dryer is back working! Pleased with the product and service