Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Candy
Suitable for Candy, Baumatic, Caple, Creda, Cylinda
Stock Code: 132993
£13.71 ex. VAT
Carries the back of the drum shaft so the drum spins freely and quietly.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
General fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
This is a genuine bearing for your tumble dryer.
Helps your tumble dryer drum spin smoothly and quietly. It supports the drum as it rotates, reducing friction and wear so your clothes dry evenly without any annoying grinding noises.
Over time, bearings can wear out from all the heat and motion. If you're hearing squeaks, scrapes, or your dryer isn’t spinning as easily as it used to, it could be time for a fresh one with this part.
This tumble dryer bearing is from Candy. You can also check the other suitable brands from the list above.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
Needed a new bearing, just the job, fast delivery even with the Royal Mail strikes and over the Xmas holiday! Defiantly recommend and will use again
Small part but vital to the overall running of the machine. RansomSpares always very helpful and knowledgeable so it all helps. Fitted works as intended :)
Parts came & work as promised. The price was good also & with a little help from You Tube video saved myself an expensive repair. I would recommend using Ransom Spares & will be using them again in the future. Regards Stewart.
Part delivered quickly good quality a lot of dismantling required to fit so leave yourself plenty of time to do the job dryer now working great again
I bought this as part of a larger order to breath life back into an extremely well used Candy Dryer. The only challenge with the fitting is, as you might expect, the work involved in dismantling the dryer to get the drum out and replace this particular part. Once the dryer is dismantled, so long as you have some circlip pliers, removing the old bearing and replacing it with this one is a doddle. Since the repairs, the dryer has been working as if I only bought it yesterday!