Bosch
Bosch Tumble Dryer Water Pump00145796
Suitable for Bosch, Balay, Constructa, Koenic, Lord
Stock Code: 840718
£30.05inc. VAT
£25.04 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Pumps the collected water up to the container or drain.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E3 | Bosch | Means a full condensation tank or a drainage problem preventing water removal. It is usually caused by a kinked hose or a blocked pump. | High |
| E4 | Bosch | Means a drainage problem, where water is not being pumped out correctly, or an overfilled drum or a temperature sensor malfunction. It is usually caused by a blocked filter, a clogged pump, or a kinked hose. | High |
| E25 | Siemens | Means there is a serious issue with the drainage system. It is usually caused by a blocked drain pump, a clogged filter, a faulty sensor, or a full condenser reservoir. | High |
| E6 | Siemens | Means there is a drainage fault or a heating issue. It is usually caused by a clogged drain pump filter, a blocked hose, or a failure in the heating system. | High |
E3High
Bosch
Means a full condensation tank or a drainage problem preventing water removal. It is usually caused by a kinked hose or a blocked pump.
E4High
Bosch
Means a drainage problem, where water is not being pumped out correctly, or an overfilled drum or a temperature sensor malfunction. It is usually caused by a blocked filter, a clogged pump, or a kinked hose.
E25High
Siemens
Means there is a serious issue with the drainage system. It is usually caused by a blocked drain pump, a clogged filter, a faulty sensor, or a full condenser reservoir.
E6High
Siemens
Means there is a drainage fault or a heating issue. It is usually caused by a clogged drain pump filter, a blocked hose, or a failure in the heating system.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliers
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 00145796
- Genuine Spare Part
- Yes