Bosch
Bosch Tumble Dryer Temperature Limiter Sensor NTC00600157
Suitable for Bosch, Balay, Constructa, Cylinda, Gaggenau
Stock Code: 54329
£30.40inc. VAT
£25.33 ex. VAT
Usually dispatched in 5 working days
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Measures the drying air temperature so the cycle runs at the right heat.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E24 | Bosch | Means a serious internal electronics fault, signalling control board failure. It is usually caused by a control board malfunction. | Medium |
| E2 | Siemens | Means the temperature sensor (NTC sensor) is detected as open-circuit, shorted, or failing, so the dryer cannot accurately measure heat and often will not heat or stops early. It is usually caused by a faulty NTC sensor or a sensing circuit failure. | High |
| E29 | Siemens | Means the thermistor (temperature sensor) has failed, often 5-8 minutes into a cycle, so the dryer cannot accurately measure drum heat and stops for safety. It is usually caused by a faulty thermistor, restricted airflow, or a blocked filter. | High |
E24Medium
Bosch
Means a serious internal electronics fault, signalling control board failure. It is usually caused by a control board malfunction.
E2High
Siemens
Means the temperature sensor (NTC sensor) is detected as open-circuit, shorted, or failing, so the dryer cannot accurately measure heat and often will not heat or stops early. It is usually caused by a faulty NTC sensor or a sensing circuit failure.
E29High
Siemens
Means the thermistor (temperature sensor) has failed, often 5-8 minutes into a cycle, so the dryer cannot accurately measure drum heat and stops for safety. It is usually caused by a faulty thermistor, restricted airflow, or a blocked filter.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 00600157
- Genuine Spare Part
- Yes