Bosch
Bosch Tumble Dryer Heating Element00753221
Suitable for Bosch, Constructa, Neff, Siemens
Stock Code: 852423
£63.70inc. VAT
£53.08 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E5 | Bosch | Means a heating circuit fault leaving the dryer cold, or a drainage problem. It is usually caused by a tripped thermal cut-out, a faulty heating element, or a blocked lint filter. | High |
| E6 | Bosch | Means a heating problem where the dryer is failing to heat up. It is usually caused by restricted airflow from a severely clogged lint filter or heat exchanger, or a failed heater element. | High |
| E9 | Bosch | Means a serious heating circuit fault, usually meaning the dryer has overheated. It is usually caused by a failed heating element, a tripped thermal cut-out, or an electronic control board problem. | High |
| E1 | Neff | Means the appliance is overheating or unable to dry properly through blocked airflow. It is usually caused by a severely restricted lint filter, restricted airflow, or a faulty heating sensor or thermostat. | Medium |
| E19 | Siemens | Means the unit is taking too long to reach the target temperature. It is usually caused by a faulty heating element, a tripped thermal cut-out, or restricted airflow from blocked lint filters. | High |
| E63 | Siemens | Means there is a serious fault in the heating system, or a communication failure between the control board and the motor or heating unit. It is usually caused by an overheated heating element, a tripped thermostat, or faulty electronics. | High |
| E9 | Siemens | Means there is a serious overheating fault or a failure in the heating circuit. It is usually caused by blocked airflow, a faulty heating element, or a tripped thermal safety thermostat. | High |
| F9 | Siemens | Means there is a fault in the heating system or heating circuit. It is usually caused by a heating element burning out or a tripped thermal cut-out. | High |
E5High
Bosch
Means a heating circuit fault leaving the dryer cold, or a drainage problem. It is usually caused by a tripped thermal cut-out, a faulty heating element, or a blocked lint filter.
E6High
Bosch
Means a heating problem where the dryer is failing to heat up. It is usually caused by restricted airflow from a severely clogged lint filter or heat exchanger, or a failed heater element.
E9High
Bosch
Means a serious heating circuit fault, usually meaning the dryer has overheated. It is usually caused by a failed heating element, a tripped thermal cut-out, or an electronic control board problem.
E1Medium
Neff
Means the appliance is overheating or unable to dry properly through blocked airflow. It is usually caused by a severely restricted lint filter, restricted airflow, or a faulty heating sensor or thermostat.
E19High
Siemens
Means the unit is taking too long to reach the target temperature. It is usually caused by a faulty heating element, a tripped thermal cut-out, or restricted airflow from blocked lint filters.
E63High
Siemens
Means there is a serious fault in the heating system, or a communication failure between the control board and the motor or heating unit. It is usually caused by an overheated heating element, a tripped thermostat, or faulty electronics.
E9High
Siemens
Means there is a serious overheating fault or a failure in the heating circuit. It is usually caused by blocked airflow, a faulty heating element, or a tripped thermal safety thermostat.
F9High
Siemens
Means there is a fault in the heating system or heating circuit. It is usually caused by a heating element burning out or a tripped thermal cut-out.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 00753221
- Genuine Spare Part
- Yes
07
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Sorted overheating problem
We were hoping to buy replacement thermostats for our tumbledryer, but our model required this ‘integrated’ part. It arrived quickly and was easy to fit. Probably saved £100+ by not needing an ‘engineer visit’!!
Janette · Woking ·
Quality
Value
Ease of Fitting