Bosch
Bosch Tumble Dryer Fluff Filter53952
Suitable for Bosch, Balay, Constructa, Koenic, Lynx
Stock Code: 999100
£12.75inc. VAT
£10.63 ex. VAT
In Stock
Next Day Delivery Available
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
What this part does
Traps fluff and lint from the air so it does not block the dryer.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E1 | Bosch | Means restricted airflow causing the unit to overheat. It is usually caused by a blocked lint filter, a dirty heat exchanger or condenser, a dirty moisture sensor, or a blocked exhaust vent. | High |
| E2 | Bosch | Means a blocked lint filter or insufficient airflow, causing a potential overheating condition. It is usually caused by a clogged lint filter, a clogged condenser, a blocked exhaust hose, or an overloaded machine. | High |
| E6 | Bosch | Means a heating problem where the dryer is failing to heat up. It is usually caused by restricted airflow from a severely clogged lint filter or heat exchanger, or a failed heater element. | Medium |
| E7 | Bosch | Means insufficient airflow, restricted ventilation, or an electronic control fault. It is usually caused by a heavily blocked lint filter or a clogged condensation unit. | High |
| E1 | Neff | Means the appliance is overheating or unable to dry properly through blocked airflow. It is usually caused by a severely restricted lint filter, restricted airflow, or a faulty heating sensor or thermostat. | High |
| E19 | Siemens | Means the unit is taking too long to reach the target temperature. It is usually caused by a faulty heating element, a tripped thermal cut-out, or restricted airflow from blocked lint filters. | Medium |
E1High
Bosch
Means restricted airflow causing the unit to overheat. It is usually caused by a blocked lint filter, a dirty heat exchanger or condenser, a dirty moisture sensor, or a blocked exhaust vent.
E2High
Bosch
Means a blocked lint filter or insufficient airflow, causing a potential overheating condition. It is usually caused by a clogged lint filter, a clogged condenser, a blocked exhaust hose, or an overloaded machine.
E6Medium
Bosch
Means a heating problem where the dryer is failing to heat up. It is usually caused by restricted airflow from a severely clogged lint filter or heat exchanger, or a failed heater element.
E7High
Bosch
Means insufficient airflow, restricted ventilation, or an electronic control fault. It is usually caused by a heavily blocked lint filter or a clogged condensation unit.
E1High
Neff
Means the appliance is overheating or unable to dry properly through blocked airflow. It is usually caused by a severely restricted lint filter, restricted airflow, or a faulty heating sensor or thermostat.
E19Medium
Siemens
Means the unit is taking too long to reach the target temperature. It is usually caused by a faulty heating element, a tripped thermal cut-out, or restricted airflow from blocked lint filters.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
- 1
- 2
- 3
- 4
- 5
06
Specifications
- Part Number
- 53952
- Alternative Part Numbers
- 00497526, 00644544, 00645173, 00645174
- Genuine Spare Part
- No
07
More Details
This is a high-quality tumble dryer fluff filter.
Lint, fibres, and other debris left behind by wet clothes are collected through a fluff filter in a dryer. Has a fine screen mesh that traps these particles from the laundry during the drying.
If you see any rips, tears, or holes in the mesh, lint can pass through, and your filter isn’t as effective when you use it in the drying cycle. Change it with this replacement part.
This fluff filter fits Balay, Bosch, Constructa, Koenic, Lynx, Neff, Pitsos, Profilo, Siemens, and Viva tumble dryers.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Tumble dryer mesh lint filter
Great service, good value for money, speedy delivery and the part fits perfectly and is actually better than the original filter. very happy with purchase.
Lisa Eyles · WORTHING ·
Quality
Value
Ease of Fitting