Bosch
Bosch Tumble Dryer Fluff Filter00656033
Suitable for Bosch, Balay, Constructa, Gaggenau, Koenic
Stock Code: 546322
·
£21.90inc. VAT
£18.25 ex. VAT
In Stock
Next Day Delivery Available
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
What this part does
Traps fluff and lint from the air so it does not block the dryer.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E1 | Bosch | Means restricted airflow causing the unit to overheat. It is usually caused by a blocked lint filter, a dirty heat exchanger or condenser, a dirty moisture sensor, or a blocked exhaust vent. | High |
| E2 | Bosch | Means a blocked lint filter or insufficient airflow, causing a potential overheating condition. It is usually caused by a clogged lint filter, a clogged condenser, a blocked exhaust hose, or an overloaded machine. | High |
| E6 | Bosch | Means a heating problem where the dryer is failing to heat up. It is usually caused by restricted airflow from a severely clogged lint filter or heat exchanger, or a failed heater element. | Medium |
| E7 | Bosch | Means insufficient airflow, restricted ventilation, or an electronic control fault. It is usually caused by a heavily blocked lint filter or a clogged condensation unit. | High |
| E1 | Neff | Means the appliance is overheating or unable to dry properly through blocked airflow. It is usually caused by a severely restricted lint filter, restricted airflow, or a faulty heating sensor or thermostat. | High |
| E19 | Siemens | Means the unit is taking too long to reach the target temperature. It is usually caused by a faulty heating element, a tripped thermal cut-out, or restricted airflow from blocked lint filters. | Medium |
E1High
Bosch
Means restricted airflow causing the unit to overheat. It is usually caused by a blocked lint filter, a dirty heat exchanger or condenser, a dirty moisture sensor, or a blocked exhaust vent.
E2High
Bosch
Means a blocked lint filter or insufficient airflow, causing a potential overheating condition. It is usually caused by a clogged lint filter, a clogged condenser, a blocked exhaust hose, or an overloaded machine.
E6Medium
Bosch
Means a heating problem where the dryer is failing to heat up. It is usually caused by restricted airflow from a severely clogged lint filter or heat exchanger, or a failed heater element.
E7High
Bosch
Means insufficient airflow, restricted ventilation, or an electronic control fault. It is usually caused by a heavily blocked lint filter or a clogged condensation unit.
E1High
Neff
Means the appliance is overheating or unable to dry properly through blocked airflow. It is usually caused by a severely restricted lint filter, restricted airflow, or a faulty heating sensor or thermostat.
E19Medium
Siemens
Means the unit is taking too long to reach the target temperature. It is usually caused by a faulty heating element, a tripped thermal cut-out, or restricted airflow from blocked lint filters.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
- 1
- 2
- 3
- 4
- 5
06
Specifications
- Part Number
- 00656033
- Genuine Spare Part
- Yes
07
More Details
This is a genuine tumble dryer fluff filter.
Catches all that lint to keep things clear and the hot air flowing freely. That means your dryer works super efficiently and gets your laundry dry way faster.
Now, if you don't give your lint filter a good clean often or swap it out when it's getting full, it'll wear out. Over time, all that fluff and debris builds up, making your dryer work harder and dry slower. If your dryer isn't as zippy as it used to be, pop in this replacement part!
This tumble dryer fluff filter is from Bosch. It also fits Balay, Constructa, Gaggenau, Koenic, Lord, Neff, Novamatic, Pitsos, Profilo, Schulthess, and Siemens models.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (3)
5.03 reviews
5
3
4
0
3
0
2
0
1
0
Great product
Having had our tumble dryer for around 7 years, the clothes were really notndrying well and the filter warning light kept coming on with very little fluff in it. So I bought a new one... and suddenly it like we have a new machine! Never thought replacing a filter would make such a difference but it did.
Harriet · Sheffield ·
Quality
Value
Ease of Fitting
Perfect fit
Exactly the same parts as supplied with a new tumble drier, inner and outer filter, check your machine model number with ransom model list and it will fit.
David Briggs · Durham ·
Quality
Value
Ease of Fitting
Good quality and easy to fit.
Not very much to say. It is a replacement part for the lint filter which means that the old one is taken out and this one is inserted. The price was very good and the delivery was very quick.
Antony Wilson · Pembroke Dock ·
Quality
Value
Ease of Fitting
09
Questions & Answers (4)
WILL THIS FILTER FIT A Bosch WTG86400GB?
Mr Mark · Southampton ·
Hi Mark, the filter required for your model is RS852283.
JordanStaff·
will this filter fit the WTA3003GB/01 model
janet · manchester ·
Hi Janet, I'm afraid the filter for your model was part RS53944 but this is now obsolete so we cannot supply it.
JordanStaff·
Is the correct filter for WTW85490GB/01 Bosch WDT65? Thanks,
Tony · Oxford ·
Hi Tony, I can confirm this is the correct filter for your model.
JordanStaff·
I have a Bosch WTW85231GB/05. You do say it fits WTW85231GB/01 model. Will it fit the /05 model. The numbers printed on my filter are 9000891712 and 3007261 and SPL-No 375787
Tim · Essex ·
Hi Tim, I can confirm this is the correct filter for your model.
JordanStaff·