Bosch
Bosch Tumble Dryer Drain Hose Kit 2m12013784
Suitable for Bosch, Balay, Constructa, Cylinda, De Dietrich
Stock Code: 54111
£14.60inc. VAT
£12.17 ex. VAT
In Stock
Next Day Delivery Available
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
What this part does
Carries the condensed water from the dryer to an outside drain.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E3 | Bosch | Means a full condensation tank or a drainage problem preventing water removal. It is usually caused by a kinked hose or a blocked pump. | High |
| E4 | Bosch | Means a drainage problem, where water is not being pumped out correctly, or an overfilled drum or a temperature sensor malfunction. It is usually caused by a blocked filter, a clogged pump, or a kinked hose. | High |
| E23 | Neff | Means the Aquastop system has activated because water is collecting in the base pan, locking the door and halting operation to prevent flooding. It is usually caused by an internal leak or hose damage. | High |
| E6 | Neff | Means the unit cannot remove water or the door is not registering as locked. It is usually caused by a blocked filter or pump, or a door interlock fault. | High |
| E25 | Siemens | Means there is a serious issue with the drainage system. It is usually caused by a blocked drain pump, a clogged filter, a faulty sensor, or a full condenser reservoir. | High |
| E6 | Siemens | Means there is a drainage fault or a heating issue. It is usually caused by a clogged drain pump filter, a blocked hose, or a failure in the heating system. | High |
E3High
Bosch
Means a full condensation tank or a drainage problem preventing water removal. It is usually caused by a kinked hose or a blocked pump.
E4High
Bosch
Means a drainage problem, where water is not being pumped out correctly, or an overfilled drum or a temperature sensor malfunction. It is usually caused by a blocked filter, a clogged pump, or a kinked hose.
E23High
Neff
Means the Aquastop system has activated because water is collecting in the base pan, locking the door and halting operation to prevent flooding. It is usually caused by an internal leak or hose damage.
E6High
Neff
Means the unit cannot remove water or the door is not registering as locked. It is usually caused by a blocked filter or pump, or a door interlock fault.
E25High
Siemens
Means there is a serious issue with the drainage system. It is usually caused by a blocked drain pump, a clogged filter, a faulty sensor, or a full condenser reservoir.
E6High
Siemens
Means there is a drainage fault or a heating issue. It is usually caused by a clogged drain pump filter, a blocked hose, or a failure in the heating system.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 12013784
- Alternative Part Numbers
- 00284849, 00445594, 12010597, 12014968
- Genuine Spare Part
- Yes
07
More Details
This is a genuine drain hose kit for your tumble dryer. Comes with a mount to hang it and fasteners for easy installation. Measures 2 metres long with an outer diameter of 11mm and an inner diameter of 7mm.
Directs water away from the dryer to prevent buildup. The 2-metre length allows for flexible installation, ensuring proper drainage even if the dryer is far from the outlet.
Check for leaks, cracks, or tears in the hose, as well as any discoloration, which indicate damage and may affect its performance. Change it with this replacement part.
This drain hose kit for your tumble dryer is from Bosch. Also fits Arcelik, Blomberg, Elektra Bregenz, and Grundig tumble dryers.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Questions & Answers (5)
Hi, What is the internal and external diameter of the hose ends please.
Nigel · Kingsteignton ·
Hi, the outer diameter of these hose ends are 11mm and the inner diameter is 7mm.
JordanStaff·
I need to extend this hose to reach the original waste. Is there a connection I can use to connect 2 of these hoses together?
Luke Harrison · London ·
Hi Luke, we have a drain hose extension kit, part number RS120615.
JordanStaff·
Hi, will this fit a Beko DTBC8001 tumble dryer?, what diameter is the hose?
Mike · Runcorn ·
Hi Mike, the drain hose required for your model is RS587556.
JordanStaff·
Hi, The waste I'm connecting to has a 1.5" connector available and I'm not inclined to replace the whole sink waste trap just to gain a 1" connector. Is there a reducer or available?
David · Market Harborough ·
Hi David, Unfortunately that's not a part we can supply. I'd recommend contacting Bosch directly.
JordanStaff·
what is the length of the hose
ONISIFOROS · NICOSIA ·
Hi Onisiforos, this hose is 2m.
JordanStaff·