Beko
Beko Tumble Dryer Heater ElementC00865371
Suitable for Beko, Blomberg, Grundig
Stock Code: 834220
·
£32.20inc. VAT
£26.83 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E3 | Beko | Means a heating circuit fault, where the dryer runs but fails to heat properly and leaves clothes damp. It is usually caused by the heater control. | High |
| E2 | Grundig | Means a heating failure where the unit is not heating up, or a temperature sensor issue. It is usually caused by a faulty heating element, a tripped thermal fuse, or a damaged thermistor. | High |
| E5 | Grundig | Means a heating failure where the dryer stops within 10 to 15 seconds of starting. It is usually caused by a faulty thermistor or temperature sensor, or a heating element malfunction. | High |
| E7 | Grundig | Means the unit stops mid-cycle or refuses to heat. It is usually caused by a heating element failure or a severe airflow restriction in the lint filters, evaporator, or condensing unit. | High |
E3High
Beko
Means a heating circuit fault, where the dryer runs but fails to heat properly and leaves clothes damp. It is usually caused by the heater control.
E2High
Grundig
Means a heating failure where the unit is not heating up, or a temperature sensor issue. It is usually caused by a faulty heating element, a tripped thermal fuse, or a damaged thermistor.
E5High
Grundig
Means a heating failure where the dryer stops within 10 to 15 seconds of starting. It is usually caused by a faulty thermistor or temperature sensor, or a heating element malfunction.
E7High
Grundig
Means the unit stops mid-cycle or refuses to heat. It is usually caused by a heating element failure or a severe airflow restriction in the lint filters, evaporator, or condensing unit.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- C00865371
- Alternative Part Numbers
- 2976680200
- Genuine Spare Part
- Yes
07
More Details
How does the heating element in a tumble dryer control temperature?
The clothes are dried using the heat generated by the tumble dryer's heater components, which consist of a thermostat and an electrical resistance device used to control the temperature.
When the dryer is turned on, the heater element receives electrical electricity. As the current passes through the wire, it encounters resistance, causing the wire to heat up. The heated air produced in the process is then used to dry the clothing.
When do they need to get replaced?
Heating and cooling processes, tension, mineral deposits from hard water, and ageing can cause heater elements to deteriorate over time.
Signs indicating the need for heater element replacement include insufficient heating, prolonged drying times, inadequate heat production, cold spots on clothing or the drum, visible damage (burn marks, breaks, or corrosion) on the elements, and a malfunctioning thermostat affecting temperature regulation.
Would this fit in my tumble dryer?
This heater element is a genuine Beko tumble dryer replacement part. It also fits Blomberg and Grundig tumble dryers. Use our compatibility checker to see if this part fits your model.
08
Customer Reviews (8)
4.98 reviews
5
7
4
1
3
0
2
0
1
0
Sort by:||
Heater
Good product Easy to fit and works perfectly well Will buy again if required
David Lee · Fulwood ·
Quality
Value
Ease of Fitting
Great product
Great item super quick delivery! Fitted the part my self very easy.. Saved me £350 on a new machine. A*****
Claire · London ·
Quality
Value
Ease of Fitting
Exactly what I needed
I was able to buy this item in confidence as the photo showed exactly the same part as my suspect heater. It came quickly and was easy to fit. Moreover it cured the problem!
Andrew · Williton ·
Quality
Value
Ease of Fitting
Heater element
Straight forward to fit, seems to be good quality time will tell, only had it a couple of weeks so can’t really rate it.
Eric new · Kirkby in furness ·
Quality
Value
Ease of Fitting
Element
Works perfectly and was easy to install. Saved us from having to buy a new dryer!
Amanda Cockle · Hebburn ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
What is the wattage specification for this heater? (e.g. 1600W 700W)
Mark · Preston ·
Hi Mark, thanks for your question. This is 230V, 1600W 700W.
JordanStaff·