Beko
Beko Tumble Dryer Heater ElementC00865374
Suitable for Beko, Arctic, Blomberg, Elektra Bregenz, Grundig
Stock Code: 834170
·
£52.70inc. VAT
£43.92 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E3 | Beko | Means a heating circuit fault, where the dryer runs but fails to heat properly and leaves clothes damp. It is usually caused by the heater control. | High |
| E2 | Grundig | Means a heating failure where the unit is not heating up, or a temperature sensor issue. It is usually caused by a faulty heating element, a tripped thermal fuse, or a damaged thermistor. | High |
| E5 | Grundig | Means a heating failure where the dryer stops within 10 to 15 seconds of starting. It is usually caused by a faulty thermistor or temperature sensor, or a heating element malfunction. | High |
| E7 | Grundig | Means the unit stops mid-cycle or refuses to heat. It is usually caused by a heating element failure or a severe airflow restriction in the lint filters, evaporator, or condensing unit. | High |
E3High
Beko
Means a heating circuit fault, where the dryer runs but fails to heat properly and leaves clothes damp. It is usually caused by the heater control.
E2High
Grundig
Means a heating failure where the unit is not heating up, or a temperature sensor issue. It is usually caused by a faulty heating element, a tripped thermal fuse, or a damaged thermistor.
E5High
Grundig
Means a heating failure where the dryer stops within 10 to 15 seconds of starting. It is usually caused by a faulty thermistor or temperature sensor, or a heating element malfunction.
E7High
Grundig
Means the unit stops mid-cycle or refuses to heat. It is usually caused by a heating element failure or a severe airflow restriction in the lint filters, evaporator, or condensing unit.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- C00865374
- Alternative Part Numbers
- 2976680600
- Genuine Spare Part
- Yes
07
More Details
This is a genuine tumble dryer heater element. It’s at the rear of the drum or at the bottom of your dryer’s housing.
Your tumble dryer not heating enough? Must be with your heater element.
The heater element produces the heat circulated in the drying chamber. This heat evaporates moisture from your damp laundry including shirts, towels, and other items inside the dryer.
Has wiring harnesses to connect to your dryer’s control system.
This heater element is from Hoover but also fits other tumble dryer brands like Blomberg and Grundig.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (4)
5.04 reviews
5
4
4
0
3
0
2
0
1
0
Great service
Quick and efficient service. Easy to read product information that made buying the correct product effortless.
Stacey Caldow · Ashington ·
Quality
Value
Ease of Fitting
Great product,easy to fit
Great product, easy to fit. Prompt delivery, thanks very much.
John Villeneuve · Poole ·
Quality
Value
Ease of Fitting
Good
Quite good, easy to fits…. Hjmccxszss
Neiva · London ·
Quality
Value
Ease of Fitting
Excellent part
This part was an exact match to the one we removed, it was very easy to order. Easy to fit as it's basically plug and play so even people like me (housewife) can fit. I would definitely recommend and it was the cheapest on the market for the part.
Jemma · Durham ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
Will this heater replace part 298323010 which is the unit fited to my model DCY9316G Beko tumble dryer please
Stuart · Camberley ·
Hi Stuart, I can confirm this heater element is listed as correct for your model.
JordanStaff·