Beko
Beko Tumble Dryer Heater Element & ThermostatC00865378
Suitable for Beko
Stock Code: 839503
£49.40inc. VAT
£41.17 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E3 | Beko | Means a heating circuit fault, where the dryer runs but fails to heat properly and leaves clothes damp. It is usually caused by the heater control. | High |
E3High
Beko
Means a heating circuit fault, where the dryer runs but fails to heat properly and leaves clothes damp. It is usually caused by the heater control.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- C00865378
- Alternative Part Numbers
- 2970100500
- Genuine Spare Part
- Yes
07
More Details
Genuine heater element and thermostat. Designed to handle high temperatures during the drying cycle.
The heater warms the air in the dryer, maintaining the right temperature for drying your clothes. The thermostat monitors the heat. If it overheats, it interrupts the electrical circuit and stops the cycle until the temperature is normal again.
When you replace the old heater, the thermostat might be worn out so this set comes with a new one.
This heater and thermostat set is from Beko.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Questions & Answers (6)
Sort by:|
Hi There, Will this fit a BEKO DC7112W condenser dryer please? Thanks
Shane · Cardiff ·
Hi Shane, the heater element required for your model is RS834011.
JordanStaff·
Hi what is the wattage of this unit and will it fit a DTLCE80121W
Antasia · Brighton ·
Hi Antasia, this heater element is 2300W, however I'm afraid it's not listed for your model and we cannot supply one that is.
JordanStaff·
Would this fit DCU7230 W 7182681500
Gemma · Llanhilleth ·
Hi Gemma, the heater element you require is RS834009.
JordanStaff·
Is this the right onw for BEKO DCU 7230 B? THANKS
· Yorlahire ·
Hi Yasin, the heater element for your model is RS834009.
JordanStaff·
Hi please can you tell me if this will fit my Beko DTBC80001W Condenser Tumble Dryer? Thanks and stay safe ;)
Terri · West Yorkshire ·
Hi Terri, the heater element required for your model is RS834220.
JordanStaff·