Beko
Beko Tumble Dryer CapacitorC00864678
Suitable for Beko, Altus, Arcelik, Arctic, Blomberg
Stock Code: 827298
·
£9.85inc. VAT
£8.21 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Gives the motor the boost it needs to start and keep the drum turning.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E6 | Grundig | Means the motor is failing to turn the drum. It is usually caused by a blockage, overheating from a restricted filter, or a worn-out faulty motor. | High |
E6High
Grundig
Means the motor is failing to turn the drum. It is usually caused by a blockage, overheating from a restricted filter, or a worn-out faulty motor.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and discharge the capacitor before you start.
You’ll needScrewdriverNut driverInsulated screwdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- C00864678
- Alternative Part Numbers
- 2807960400
- Genuine Spare Part
- Yes
07
More Details
This is a genuine 8 uF capacitor for your tumble dryer.
It gives the motor that extra push it needs to start up smoothly. That means your dryer gets going effortlessly and keeps things running consistently and efficiently through every single drying cycle.
But, capacitors can get worn out over time. If your dryer is slow to get started, won't run at all, or seems to be struggling mid-cycle, this little power-booster might be the problem. Simply swap it out with this part.
This tumble dryer capacitor is from Beko. It also fits Altus, Arcelik, Arctic, Blomberg, Elektra Bregenz, FAR, Flavel, Grundig, and Zenith models.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
08
Customer Reviews (4)
5.04 reviews
5
4
4
0
3
0
2
0
1
0
Great product
Amazing site. It identified my part and was a lot cheaper to buy on here than anywhere else.
David · London ·
Quality
Value
Ease of Fitting
Saved me buying a new dryer.
Inexpensive item, works perfectly, very easy to fit. Fast delivery, great communication. Recommended.
DAVID HARRIES · Selby ·
Quality
Value
Ease of Fitting
Perfect fix for my Beko dryer
My Beko DSX83410W tumble dryer was having problems starting up, and this part fixed the problem perfectly. Part is reasonably easy to fit, followed the Ransomspares video on removing the top and side to access the faulty capacitor and no problems at all.
Bill Roberts · Gillingham ·
Quality
Value
Ease of Fitting
Great product, easy to fit
I did panic until I found your site I thought I was going to have to buy a new tumble drier, thank you for being there.... mick
mick cowley · Sheffield ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
What are the physical dimensions of this capacitor? I am replacing a blown one on my bench grinder and cannot get an original part. This one has the correct value, working voltage, and the earthing stud is in the right space. I need to know if it will fit into the available space. Thankyou
Norman · West Sussex ·
Hi Norman, this capacitor is 80mm tall and 30mm in diameter.
JordanStaff·