Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
AEG
Suitable for AEG, Arthur Martin, Chef, Electrolux, Faure
Stock Code: 936995
£15.13 ex. VAT
Seals the gap around the door so warm air cannot escape.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E30 | Zanussi | Means an Aqua Control or water system failure where water has leaked into the base tray and the machine has entered safety mode to prevent flooding, frequently encountered on washer dryer models. It is usually caused by a faulty door seal, a blocked drain pipe, or a pressure switch fault. | High |
| E40 | Zanussi | Means a door lock fault, signalling that the door is not sealing or locking properly. It is usually caused by an improperly closed door, an overloaded drum, or a faulty door lock mechanism. | High |
Zanussi
Means an Aqua Control or water system failure where water has leaked into the base tray and the machine has entered safety mode to prevent flooding, frequently encountered on washer dryer models. It is usually caused by a faulty door seal, a blocked drain pipe, or a pressure switch fault.
Zanussi
Means a door lock fault, signalling that the door is not sealing or locking properly. It is usually caused by an improperly closed door, an overloaded drum, or a faulty door lock mechanism.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
This is a genuine seal for your tumble dryer door in white.
Creates a tight closure to prevent heat loss and improve energy efficiency during operation. It also keeps moisture and lint contained.
If the seal appears warped or has lost its elasticity, it may not form a secure seal. And if you notice heat escaping during operation or excessive lint buildup, these may indicate that the seal needs replacement. Change it with this replacement part.
This door seal is from AEG. It also fits Arthur Martin, Chef, Electrolux, Faure, Fors, Husqvarna, John Lewis, Novamatic, Westinghouse, and Zanussi tumble dryers.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.