AEG
AEG Tumble Dryer Door Lock674286
Suitable for AEG, Arthur Martin, Chef, Electrolux, Elektro Helios
Stock Code: 1014621
£5.95inc. VAT
£4.96 ex. VAT
In Stock
Next Day Delivery Available
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
What this part does
Catches and holds the door shut when you push it closed.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E40 | AEG | Means the door is not recognised as closed, preventing the cycle from starting. It is usually caused by an improperly closed door, laundry trapped in the seal, overloading, or a faulty door lock or sensor. | High |
| E4 | Electrolux | Means the door or lid is not properly closed or the lock is faulty. It is usually caused by trapped laundry, a damaged door seal, or a faulty door lock mechanism. | High |
| E40 | Electrolux | Means the door is not fully closed, is detected as open, or the locking mechanism has failed. It is usually caused by a faulty door lock switch or control board that may need replacing. | High |
| E40 | Zanussi | Means a door lock fault, signalling that the door is not sealing or locking properly. It is usually caused by an improperly closed door, an overloaded drum, or a faulty door lock mechanism. | High |
E40High
AEG
Means the door is not recognised as closed, preventing the cycle from starting. It is usually caused by an improperly closed door, laundry trapped in the seal, overloading, or a faulty door lock or sensor.
E4High
Electrolux
Means the door or lid is not properly closed or the lock is faulty. It is usually caused by trapped laundry, a damaged door seal, or a faulty door lock mechanism.
E40High
Electrolux
Means the door is not fully closed, is detected as open, or the locking mechanism has failed. It is usually caused by a faulty door lock switch or control board that may need replacing.
E40High
Zanussi
Means a door lock fault, signalling that the door is not sealing or locking properly. It is usually caused by an improperly closed door, an overloaded drum, or a faulty door lock mechanism.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
06
Specifications
- Part Number
- 674286
- Alternative Part Numbers
- 8086811034, 8086811083, 8086811141
- Genuine Spare Part
- No
07
More Details
High quality door lock assembly for keeping your tumble dryer door closed. Made of plastic and metal to withstand wear and tear during washing cycles. Has a spring inside and a tab to fit in the slot in your door assembly.
The door lock secures the tumble dryer door. Drying cycle won’t start if the door is open.
It also helps keep you safe from the dryer’s moving parts or exposure to hot air during the cycle. You get less water leaks too while drying your clothes.
This door lock fits the tumble dryer brands from the list above.
Before ordering, please verify that this part fits your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Great
Delighted to find this online. Door broke on dryer we were in a rush. Next day delivery offer is great. Super!
Sarah · Berkshire ·
Quality
Value
Ease of Fitting