AEG
AEG Tumble Dryer Door Handle Catch8086811141
Suitable for AEG, Arthur Martin, Chef, Electrolux, Elektro Helios
Stock Code: 674286
£6.35inc. VAT
£5.29 ex. VAT
In Stock
Next Day Delivery Available
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
What this part does
Catches and holds the door shut when you push it closed.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E40 | AEG | Means the door is not recognised as closed, preventing the cycle from starting. It is usually caused by an improperly closed door, laundry trapped in the seal, overloading, or a faulty door lock or sensor. | High |
| E4 | Electrolux | Means the door or lid is not properly closed or the lock is faulty. It is usually caused by trapped laundry, a damaged door seal, or a faulty door lock mechanism. | High |
| E40 | Electrolux | Means the door is not fully closed, is detected as open, or the locking mechanism has failed. It is usually caused by a faulty door lock switch or control board that may need replacing. | High |
| E40 | Zanussi | Means a door lock fault, signalling that the door is not sealing or locking properly. It is usually caused by an improperly closed door, an overloaded drum, or a faulty door lock mechanism. | High |
E40High
AEG
Means the door is not recognised as closed, preventing the cycle from starting. It is usually caused by an improperly closed door, laundry trapped in the seal, overloading, or a faulty door lock or sensor.
E4High
Electrolux
Means the door or lid is not properly closed or the lock is faulty. It is usually caused by trapped laundry, a damaged door seal, or a faulty door lock mechanism.
E40High
Electrolux
Means the door is not fully closed, is detected as open, or the locking mechanism has failed. It is usually caused by a faulty door lock switch or control board that may need replacing.
E40High
Zanussi
Means a door lock fault, signalling that the door is not sealing or locking properly. It is usually caused by an improperly closed door, an overloaded drum, or a faulty door lock mechanism.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
06
Specifications
- Part Number
- 8086811141
- Alternative Part Numbers
- 8086811034, 8086811083
- EAN / Barcode
- 7321423247173
- Genuine Spare Part
- Yes
07
Customer Reviews (4)
5.04 reviews
5
4
4
0
3
0
2
0
1
0
Spot on
High quality polymer plastic. Perfect sized screw holes. Calming cream colour. Slotted on like a dream. Good job!
Alan Partridge · Norwich ·
Quality
Value
Ease of Fitting
Right part
Right part, easily found on website. Delivery was fairly quick. Used before and will use again.
Ian · Perth ·
Quality
Value
Ease of Fitting
Small but crucial and easy to fit
This catch replaced the original that broke because the dryer door became slightly mis-aligned with the chassis. No amount of glue on the broken part would resist the pressure of regular use and in any case a mended part with a layer of glue (or tape or any other contrivance) wouldn't fit. So a full replacement was what was needed. A bit of screwdriver-work released the broken part and the same (in reverse) put everything together once more. No hassle and an easy fix.
Trevor Woodward · Slough ·
Quality
Value
Ease of Fitting
great price
this product was perfect, easy to fit and very cheap, thankyou foe saving me so much money
sue · derby ·
Quality
Value
Ease of Fitting