Next Day Delivery Available
Hotpoint Tumble Dryer Drum Shaft Repair Kit Reviews
Reviews
Quality product
Great item, came with everything required to change the drum shaft (you will need a rivet gun). Item arrived quickly and the instructions were easy to follow. This has saved me buying a new dryer. Would definitely recommend to others.
Revived our old Creda Tumble Dryer
Our Tumble dryer we thought was in its last legs as it suddenly developed a loud banging noise, after looking at the back of the machine we found it was the common problem, the bearing which holds the back of the drum had completely worn through so it was just sitting literally on the casing. This kit was really easy to fit, the only fiddly thing was drilling out the old rivets that hold the square bearing, and fitting the new rivets (these are supplied in the kit) you just need a hand held riveting gun which you can get from a very well known online shopping website. 😁 The machine is now running better than it has done for years! that old bearing must have been on its last legs for ages as its now really quiet. 😁 With the right to repair law just coming in recently this has definitely saved us all hundreds for a new machine which would have been the case if this kit wasn't available. A fantastic bit of kit.
Comprehensive repair kit
Really good, cost effective repair kit as it includes all you could possibly need to repair the drum spindle. Getting to it takes some time effort and space but the instructions are straightforward and all you need, other than tools and time is included. Thoroughly recommend.
Great product
Drum shaft kit exactly what we needed at an excellent price.
Great product
Delivered on time replaced very easily and only lost one day of drying great service, very reasonably priced 9/10 highly recommended. Thank you.
easy fit
ordered this for my 11 yr old tumble dryer, as the shaft had broken was easy to fit only problem i had was the square bearing was the wrong one so ordered the correct one no problems.
Drum shaft kit
A really good kit, all the parts you need to replace the bearing , shaft & bearing housing. A rather fiddly job as the whole tumble dryer needs dismantling but take your time, note which screws went where and it's quite easy. Don't forget to put the belt back round the drum BEFORE reassembling the casing! You will need a pop riveting tool.
great product
this product is really easy to fit with no fuss, you can't go wrong.
Great kit.
This kit saved me a lot of money. Easy enough to fit, if you got a few tools and like DIY.
Good product.
Good clear instructions, exactly the correct spares for the Creda drier. Very good service and price from Ransom Spares. Will use company again.
Money saved
What a great product, when I saw all the parts it looked a bit bewildering. you do need to be very practical. not for the faint hearted, I did not think I needed all of these parts, but thank goodness for them because you do. You will need a rivet gun. cost of the parts and the rivet gun a lot cheaper than a new tumble dryer.
spot on
Easy to fit if you have all the right tools as need a rivet gun saves you buying a new dryer
great
if this is what you are looking for then you will not be disappointed. And be as happy as i was when i no longer had to listen to that horrible squeal that my poor dryer was making in the end...if this is all u are changing then nice and easy.....you will need a potrivet gun for the plate that holds the rear bearing...if your changing it that is
great product
great product and cheap than replacing the tumble dryer
Drum shaft kit
The service was great as usual. Everything you need is in the kit. The only hard part is starting the 3 shaft screws into the new shaft as it is not pre tapped. A 5mm tap solved this and the rest was plain sailing.