Next Day Delivery Available
Baumatic Cooker Hood Extractor Motor Fan Impeller Reviews
£20.90
Due back in stock 14th Aug 2024
Part No: RS265587
Reviews
As Original Part, Easy Fit
Part is same as original, removed whole motor from extractor before fitting. Two man job to refit motor as needs support from below hood whilst screwed back from top. Overall easy job for an amateur just turn off power and note wiring details before dismantling.
By Russell Walden - Matlock
1st May 2021
Excellent service and great product
Bought this to replace the broken impeller fan on my Baumatic BT7.3GL, product was a genuine Baumatic/Hoover part and was a straightforward fit. Speaking to Baumatic they would only supply a complete motor unit for £100+, it's great that companies like RansomSpares.co.uk can provide parts like this and keep perfectly good appliances working for many more years at a fraction of the cost, repair! Not replace! Given the current situation with CV19 the speed of service and delivery was amazing, I did pay the extra for speedy delivery, the item arrived by 9am the next day.
By Mike - STOCKTON-ON-TEES
21st Oct 2020
Easy Fit Cooker Hood Impeller Replacement
Product received promptly and was as described on-line. Isolate and disconnect power supply to motor. Carefully release duct cover and glass hood and set aside. Remove grease filters and lift casing an motor unit to remove from wall fixings. Release complete motor unit and remove carbon filters (if fitted) and black grill units from either end. Using narrow nose pliers and small box spanner, remove two locking nuts, spring washer and spacers from end of rotor spindle, remembering to turn nuts clockwise (left hand thread). Remove old impeller and clean spindle. TAKE THIS OPPORTUNITY TO THOROUGHLY CLEAN AND DE-GREASE ALL COOKER HOOD COMPONENTS BEFORE REASSEMBLY. Introduce new impeller blade (white ref: number facing towards you), aligning flat rebate on spindle with that in the impeller, gently pushing until fully seated. Securely refit spacers, spring washer and two locking nuts in reverse order, remembering to turn nuts anti-clockwise (left Hand thread). Reassemble and install cooker hood in reverse order and reconnect to power supply. HAPPY EXTRACTION.
By keith harman - Witham, England
23rd Sep 2020
New Life
Impellor was a perfect replacement for the job, extraction unit is now as good as new. Ransome Spares are very efficient.
By Roger - Manaccan
24th Apr 2020
Ideal fit
Although not listed as the part for the cookerhood I have a previous review on site labelled it as being a fit for the BT7.3GL. As such I bought one and found it a perfect fit. Easy to connect to the motor once it was out of the canopy. Don't forget that the nut on the end of the motor spindle is a left hand thread.
By Steve Somerville - Falkirk
21st Jan 2019
Good Replacement
Ordered this fan as a replacement for the 7BT3GL cooker hood, based on previous reviews, and it fits a treat. My only comment is that I think they should be packaged better (in a box with protection) as these fans seem to become easily unbalanced. They arrived in flimsy cardboard packing.
By Keith - Nuneaton
11th Dec 2018
Extractor impellar
Impellar part no rs 265587 fitted perfect into my hob extractor baumatic BT7.3GL its running like new again now thanks will shop here again
By Paul lynch - Ireland
21st Nov 2018
It works
It arrived in a week, worked great, right part for the job.
By Stavros - Amsterdam
30th Oct 2018
Fits well, quick delivery
Good communication and fast delivery to the Netherlands. Propellor fits well In our hood. Was a bit difficult to remove the old bolt, but flattened the screw of the motor to get more grip with a pincer. After this it was easy.
By Jaap - Amsterdam
24th Feb 2018
Successful replacement
Our Baumatic BT9.3BGL cooker hood was making a terrible racket and I was getting further earache from the wife about replacing it with a new one at almost £200. I saw this replacement impeller on Ransom spares, with good reviews, and although the fitment listing did not include my hood, I decided to try it as the cost was low enough for it not to matter too much if it was unsuitable. I dismantled the cooker hood and was able to remove the old impeller fairly easily. (The information that the nut was left-handed from previous reviews was invaluable.) The nut came off fairly easily just by holding the impeller steady. Side by side, the old and new impellers looked identical, with no obvious damage to the old one so I didn't have high hopes that the new one would make much difference. I reassembled everything and switched it on and was surprised to find that even at top speed, the hood was virtually silent again (or as quiet as it was when new.) The old impeller must have been warped just enough to cause vibration and excessive noise. Everybody in the house is now happy and the purchase of the new impeller was an excellent decision. (I don't know for sure, but I think this part probably fits 60cm, 90cm and 100cm BT Baumatic hoods.)
By Colin Sim - Rothienorman
22nd Nov 2017
Good replacement part.
Not listed for my cooker hood, Baumatic BT73BGL, but dimensions and style the same. Fitted perfectly and was an improvement on the original ( had a metal centre).
By Alan Mellor - Nr Boston
28th Oct 2017
Simple solution made difficult
Our BT7.3GL impeller inevitably failed so we got this as a replacement. Officially it's not for the BT7.3GL and they'd rather you have a complete new motor assembly which costs almost as much as just replacing the whole thing. Anyway, arrived quickly and well packaged so had a go fitting it. Once removed from the housing (we left the cable connected to the electronics although the appliance wasn't mains connected), you can remove the covers to get to the impeller fairly easy. You can see how the poor plastic only design of the original impeller had worn and become eccentric. Step 2 is to remove the impeller from the motor spindle. The nut is a left hand thread so turn clockwise to loosen. This is where our problem began. You need to hold the spindle with grips or pliers (put some tape to try and prevent thread damage). It just wouldn't budge. Eventually after the appliance of some WD40 and brute force it did but by that time the end threads of the spindle were damaged so I had to cut that short to remove the damage. Step 3 is reassembly. It goes back together quite easy, the new part has a metal insert that locks onto the spindle so much improved. The second problem was getting the motor cover back on. Complete ball-ache to do but eventually succeeded and finished off reassembly. Powering up it's so much quieter and pulls a decent draught.
By Paul Scot - Preston
24th Apr 2017
Empeller Baumatic
Quickly delivered and fitted. At the best price vs quality.
By Lopez - Castelnau
30th Nov 2016
Product fired perfectly even though I could not find my model
I have a Baumatic AG600SS. Not listed but looked like it would fit. Plus it was cheap enough to discard it if it did not. Had to take fan housing off, as I did not to remove entire hood. Two man job as the electrical cable was a bit short so someone had to hold it up. Replace part which fitted perfectly. Test okay then replaced housing. All working fine.
By Martin - Ilford
20th Jun 2016
Took a chance.
I took a chance when buying this as my BT7 3GL isn't listed as compatible. It fits perfectly, although you have to remove the motor from the hood. I was able to remove the worn impellor from the motor by gripping the top of the drive shaft with pliers to stop it moving and then removed the nut. Make sure you put tape around the jaws of the pliers to prevent damage to the shaft threads. When fitting the new one make sure it is all the way on to the shaft, otherwise it will catch on the end guard. My cooker hood now works perfectly.
By Stephen Holding - Waterloo, Mersyside
27th Mar 2016
