Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Suitable For Models Of

Atag, Bauknecht, Caple, Cda (cont.dom.appl.), Edesa, Etna, Fagor, Ignis, Ikea, Integra, Kitchenaid, Mastercook, Neutral, Prima, Privileg, Smeg, Tecnik, V zug, Vegawhite, Whirlpool, Wp generation 2000 Fridges & Freezers

Description

Manufacturers Part Number:

  • 481228238175

Alternative Part Numbers:

  1. 481228238175
  2. C00311069
  3. P47
  4. WP-47

EAN Number:

  • 8058331110693

Latest Product Review(s)

4 Customer Review(s)

Important…be aware of this…!!

This product was nothing like the original components which I’ve discovered have been discontinued. (I don’t know whether that would apply to your model). However, to make matters worse, the thermostat is supplied with a rigid plastic lamp holder/adaptor which is not the same as the one in the product pictured. i therefore spent a week rooting around to try and find replacement products identical to mine, as there was no way the one supplied would fit in the housing. Unless…you bend it first! Yes…unless you “bend” the rigid plastic component! You will see in the product picture how the end opposite the lamp holder is at right angles to the rest of the plastic component. How can this be when it is supplied rigid and straight? Well there are two “fold lines” where the plastic is much thinner, the main one where the right-angle “fold” is seen in the product picture. You have to bend it along this apparently rigid line, and it does give to enable you to do this. And although it is not shown as bent in the illustration, I also had to fold the small projection which has three electrical connections, situated to one side of the plastic body, to change its orientation to be at a right-angle to the rest of the body too (a wired connector from the fridge freezer clips onto it on my model) or it would have been too wide to fit into the thermostat’s plastic housing.

By Mike Feist - SMETHWICK
19th Mar 2023

Overall

Quality

Value

Ease of Fitting

Still going strong

Ordered and fitted 10 months ago, still going strong.

By Russell Petrie - Glasgow
18th Oct 2018

Overall

Quality

Value

Ease of Fitting

A GREAT BUY

Bought this to repair my 10 year old fridge freezer saving me upwards of £350. Found a video on YouTube and completed the job in 20 minutes. Result. Thank you.

By John Morgan - CHEDDAR
14th Apr 2018

Overall

Quality

Value

Ease of Fitting

Thermostat

Great service and will definitely use random spares again

By John Simpson - Lisburn
1st Jan 2018

Overall

Quality

Value

Ease of Fitting

Questions And Answers

1 Answer(s)
Does this part include the lighting fitting also attached per the picture. Thanks
By David - Scotland - 05/10/2020
Hi David, I can confirm this thermostat comes with the lamp housing as per the image.
By Jordan - Staff Member
1 Answer(s)
How is the thermostat actually removed. All videos I've seen remove the knob, release the nut, and unscrew the housing. None of these is possible on the LP355. Does it clip in, I just don't want to force it and break it.
By Alan - Isle of Lewis - 31/05/2022
Hi Alan, unfortunately we aren't able to give fitting or technical advice. I'd recommend contacting an engineer or the manufacturers directly to see if they are able to help.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed