Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Beko
Suitable for Beko, Altus, Belling, Blomberg, Flavel
Stock Code: 835254
£10.08 ex. VAT
Reads the temperature and switches the cooling on and off to hold your setting.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
General fitting guidance. The exact steps can vary slightly with the make and model of your fridge freezer.
Safety: Switch off and unplug at the mains before you start.
A thermostat module in refrigerators monitors and regulates the temperature inside the appliance. It consists of a sensor that detects the temperature and a control unit that adjusts the cooling system based on the desired temperature setting.
When the temperature rises above the set point, the thermostat module signals the cooling system to activate, causing the compressor to start and cool the refrigerator and vice versa.
The thermostat module can develop issues like sensor failure, faulty control unit, or electrical problems. A malfunctioning thermostat module may result in temperature fluctuations, inadequate cooling, or the refrigerator not reaching the desired temperature.
This can lead to food spoilage, decreased efficiency, and damage to the compressor or other components.
This thermostat module is a genuine Beko fridge and freezer replacement part. It also suits Altus, Beko, Belling, Blomberg, Flavel, Kenwood, Lamona, Lec, Montpellier fridges and freezers. Use our compatibility checker to see if this part fits your model.
Worth a try as much cheaper than a new fridge. Worked first time.
Great fast service - part arrived in a jiffy and was very easy to fit
Great service - easy to find the part on your website, husband fitted it easily , and the freezr is working perfectly again. Best of all it saved us buying a new freezer and saved the planet by not having to scrap the old one.
Hi, CXF6114S. My fridge frozes food. I think I have to change the thermostat. If yes, is this the only part I need ? And where is located to I can change it by myself ? Thanks
Hi Stavros, I can confirm this is the temperature PCB for your model. I'd recommend contacting an engineer for fitting advice.
model number CDA648FS/1 why is everything freezing in the fridge and freezer too cold
Hi Maureen, I'm afraid we cannot diagnose faults. I'd recommend contacting an engineer to see if they can confirm the part required.
Hi, My food keeps freezing in the fridge section. I have have a Beko fridge Model no. CXFD6114B. Would this PCB sort the problem ? Thanks
Hi Gregor, I believe this should fix the issue, however we cannot be 100%. I'd recommend contacting an engineer to see if they can confirm.
Hi, Beko CDA543FS/2 - some light cold air blowing in the top half of freezer just enough to cool milk while the meat etc is warmish. warm in the refrigerator, regular noises from the fridge like normal, would this be a thermostat problem? if so then THERMOSTAT MODULE PCB would fix it??? any help please R
Hi Dennis, unfortunately we're unable to offer technical help. I'd recommend contacting an engineer to see if they can help.