Beko
Beko Fridge & Freezer LED Light Panel and ThermostatC00864479
Suitable for Beko, Blomberg, Grundig
Stock Code: 838240
·
£31.50inc. VAT
£26.25 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Senses the fridge temperature to control cooling and lights the inside when you open the door.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your fridge freezer.
Safety: Switch off and unplug at the mains before you start.
You’ll needFlat screwdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
05
Specifications
- Part Number
- C00864479
- Alternative Part Numbers
- 5907740400
- Genuine Spare Part
- Yes
06
More Details
This is a genuine LED light panel and thermostat for your fridge.
Smart cooling meets energy-efficient lighting. While the thermostat quietly maintains the perfect chill to keep your food fresh, the LED light panel brightens up every corner so you can easily spot what you need.
If your fridge lights are dim or flickering, or if the temperature is inconsistent, it might be due to a faulty thermostat or damaged lights. Replace them with these parts.
This LED light panel and thermostat for your fridge from Beko also fits Blomberg and Grundig models.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
07
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Perfect replacement but not an easy fit.
I've just replaced mine. The part is perfect but not an easy fit (not a fault of the part). The unit is clipped in but it is a VERY tight fit and requires quite a bit of force to pry it out and u clip it. At the back of the unit on the LED side, there is a small recess where you can fit a small flat blade screwdriver into. I then forced the screw driver sideways to the long side of the unit. The took a second flat blade screwdriver and did the same to the opposite side. So now you have two flat blade screwdrivers on either side of the unit (you cannot get a screwdriver in at any other point due to the tight fit and you would probably end up damaging the fridge ceiling). Now you have leverage from both screwdrivers and the idea is to try and pull the unit straight down and out. Again, it takes quite a bit of force. It will pop out. Refitting also takes quite a bit of force due to the tight fit. Try and press in the areas where the uprights are and avoid pressing on the transparent LED cover. Best to take a couple of shelves out for better access.
Rene Box · Ystalyfera ·
Quality
Value
Ease of Fitting
08
Questions & Answers (1)
Hi, How can I remove the old assembly without damaging the body?
Peter · Stevenage ·
Hi Peter, I'm afraid we can't offer fitting advice. I'd recommend contacting an engineer to see if they can help. Please accept our apologies.
JordanStaff·