Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Suitable For Models Of

AEG, Arthur Martin, Atlas, Bayer, Bomann, Corbero, Electrolux, Elektro Helios, Frigidaire, Hanseatic, Lloyds, Marijnen, Novamatic, Onyx, Privileg, Rosenlew, Tricity, Tricity Bendix, Zanker, Zanussi Fridges & Freezers

Description

Manufacturers Part Number:

  • 2425021231

Alternative Part Numbers:

  1. 2062806001
  2. 2425021082
  3. 2425021231
  4. 531012005033
  5. 531012733568
  6. 531013163062
  7. 531018897516

EAN Number:

  • 7321429677318

Latest Product Review(s)

Read All Reviews
6 Customer Review(s)

Does the job, a struggle to fit and seems a bit expensive

There is no doubt that it does the job of replacing the outgoing U/S thermostat - provided you can get it in place! Had the capillary tube been just a couple of cms longer it would have been a cinch installing it. As it was, it was a nightmare and I had to stress it to the absolute limit to get it to fit within the existing configuration. Surprised it wasn't broken in the process. Would strongly advise anyone carrying out a replacement to do a careful side by side comparison to ensure the new item capillary tube has sufficient length to accord with the specified route. Dimensions were critical in my situation. Can’t help feeling the price is somewhat excessive when compared to similar items available for other installations. All said and done, the forty quid outlay has probably extended the life of my donkey’s year old fridge/freezer for a few more moons at least!

By Bernard Edward Guignard - London
22nd Feb 2022

Overall

Quality

Value

Ease of Fitting

Easy To Fit & Saved Me Money

I "inherited" a fridge when I bought a property that varied from below freezing to +11 degrees C. Fitted it myself using a few screwdrivers and some long nose pliers. Took a few few photographs first of the existing connectors on the old thermostat and then just swopped them over one by one - perfect match of pins for the connectors by the way. Hardest part was curving the end of the thermocouple wire so it fit correctly in the mounting on the cold plate at back of fridge. Took about 30 minutes in total. Fridge now works just as it should, I've checked the temperatures and set for the ideal range. This was an old Zanussi (Electrolux) ZRT 6647 - saved me close to £200 compared to buying a replacement fridge.

By Phil Reilly - Oswestry
7th Sep 2021

Overall

Quality

Value

Ease of Fitting

Frigidaire 5201 Fridge Thermostat

Spot on Ransom - Exact replacement for my fridge - compatability confirmed at time of order. Pin for pin replacement. Unlike competitors suggested replacements, which were said to be "universal", but not the right part for my Frigidaire 5201 fridge !

By Ian Cardy - SS17 7HA
25th Sep 2020

Overall

Quality

Value

Ease of Fitting

Easy to fit

This thermostat was the same as the old thermostat. Therefore, easy to fit, disconnecting one wire from old stat, and reconnecting to the terminal on the new stat until each wire had been swapped over. Screwdriver and long nose pliers only tools needed

By Mark - Devon
27th Sep 2019

Overall

Quality

Value

Ease of Fitting

It's working well

No problems with it. Fitted it myself and it's doing the job just fine. If fitting one of these, remember to note the wire connections (or take a picture) before removing the old one as there's no wiring diagram with it.

By Simon L - Fleet, Hampshire
22nd Jul 2016

Overall

Quality

Value

Ease of Fitting

Thermostat for Tricity Bendix fridge

Good to know that exactly the right part is still available for my fridge. Easy to fit and worked perfectly and fridge back to normal once fitted. Tried a cheap alternative first which worked but did not control the temperature properly. It pays to spend a little more on the correct spare !

By Neville Ordoyno - Nottingham
12th Sep 2015

Overall

Quality

Value

Ease of Fitting

Load More Reviews

Questions And Answers

1 Answer(s)
Hello What is the length of the capillary for this item? I need one 710mm. Thanks.
By CHARLES - Falmouth - 23/02/2024
Hi Charles, I can confirm this capillary is roughly 710mm long.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question