Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Zanussi
Suitable for Zanussi, Acec, AEG, Arthur Martin, Atag
Stock Code: 230005
£6.54 ex. VAT
Gives the wash pump motor the boost it needs to start and run.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| AL7 | Electrolux | Means the washing motor has failed and the main wash pump cannot rotate to circulate water. It is usually caused by the motor being jammed, seized, or not receiving power. | High |
Electrolux
Means the washing motor has failed and the main wash pump cannot rotate to circulate water. It is usually caused by the motor being jammed, seized, or not receiving power.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
This is a genuine 4 uF capacitor for your tumble dryer.
The capacitor boosts energy for each drying cycle, giving extra power at start-up and helping the motor run with less resistance and inertia.
Like other electronic parts, a dryer capacitor wears out over time, which can lead to performance issues or failure. Replace it with this part to keep your dryer running smoothly.
Check our video below on how to fit a tumble dryer capacitor.
This capacitor is from Zanussi. You can also check other suitable brands from the list above.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
Please note that the following video will give you a guide on how to fit this part, however the exact fitting may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.