Rex
Rex Dishwasher Water Block Inlet Hose1523396206
Suitable for Rex, AEG, Corbero, Electrolux, Elektron
Stock Code: 622409
£33.70inc. VAT
£28.08 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Brings the mains water into the dishwasher and shuts off if it detects a leak.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| AL5 | AEG | Means a water inlet problem, where the machine is not filling or is taking too long to fill. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or low water pressure. | High |
| C1 | AEG | Means a water inlet problem, where the machine is not filling properly. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or a siphoned drain hose. | High |
| E1 | AEG | Means a water intake problem, where the machine is not filling properly or fast enough. It is usually caused by a closed tap, a kinked hose, or low water pressure. | High |
| E10 | AEG | Means a water inlet fault, where the dishwasher is not filling, fills too slowly, or water pressure is too low. It is usually caused by a closed tap, kinked inlet hoses, or a blocked filter. | High |
| I10 | AEG | Means the machine is not filling or is filling too slowly. It is usually caused by a closed tap, a kinked hose, a clogged inlet filter, or a faulty water inlet valve. | High |
| AL5 | Electrolux | Means the machine is not filling with water or not detecting it fast enough. It is usually caused by a closed water tap, a kinked inlet hose, or a blocked filter in the inlet hose. | High |
| C1 | Electrolux | Means the unit is not filling correctly, filling too slowly, or the water pressure is too low. It is usually caused by a closed water tap, a kinked supply hose, or a clogged inlet filter. | High |
| E1 | Electrolux | Means the unit is not receiving water or not filling fast enough. It is usually caused by a closed water tap, a kinked hose, a clogged inlet filter, or low water pressure. | High |
| I10 | Electrolux | Means the unit is not receiving enough water or is taking too long to fill. It is usually caused by a closed water tap, a kinked supply hose, or clogged inlet filters. | High |
| AL3 | Zanussi | Means the anti-flood leak protection system has been activated after water was detected in the base tray, accompanied by three beeps or a constantly draining pump. It is usually caused by a leak triggering the safety float switch, a door not sealing, a filter blockage, or a pump failure. | High |
| AL5 | Zanussi | Means the machine is not filling with water or is filling too slowly, also reported as i10 or i11. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or an activated flood protection system. | High |
| C1 | Zanussi | Means the machine is not receiving enough water or cannot detect that filling has started, accompanied by a single beep or flash. It is usually caused by a closed tap, a blocked hose, or a malfunctioning inlet valve. | High |
| E1 | Zanussi | Means a water fill failure, an inlet timeout where the machine has not received sufficient water within the designated time. It is usually caused by a closed tap, a kinked hose, or a blocked inlet filter. | High |
| E2 | Zanussi | Means the machine is not filling with water or low water pressure has been detected, while on compact models it means the wash water has failed to reach the target temperature. It is usually caused by a water inlet problem, or on compact models a heating fault. | High |
| I10 | Zanussi | Means the machine is not filling with water or is filling too slowly. It is usually caused by a closed water tap, a kinked inlet hose, a clogged filter, or a faulty water inlet valve. | High |
AL5High
AEG
Means a water inlet problem, where the machine is not filling or is taking too long to fill. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or low water pressure.
C1High
AEG
Means a water inlet problem, where the machine is not filling properly. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or a siphoned drain hose.
E1High
AEG
Means a water intake problem, where the machine is not filling properly or fast enough. It is usually caused by a closed tap, a kinked hose, or low water pressure.
E10High
AEG
Means a water inlet fault, where the dishwasher is not filling, fills too slowly, or water pressure is too low. It is usually caused by a closed tap, kinked inlet hoses, or a blocked filter.
I10High
AEG
Means the machine is not filling or is filling too slowly. It is usually caused by a closed tap, a kinked hose, a clogged inlet filter, or a faulty water inlet valve.
AL5High
Electrolux
Means the machine is not filling with water or not detecting it fast enough. It is usually caused by a closed water tap, a kinked inlet hose, or a blocked filter in the inlet hose.
C1High
Electrolux
Means the unit is not filling correctly, filling too slowly, or the water pressure is too low. It is usually caused by a closed water tap, a kinked supply hose, or a clogged inlet filter.
E1High
Electrolux
Means the unit is not receiving water or not filling fast enough. It is usually caused by a closed water tap, a kinked hose, a clogged inlet filter, or low water pressure.
I10High
Electrolux
Means the unit is not receiving enough water or is taking too long to fill. It is usually caused by a closed water tap, a kinked supply hose, or clogged inlet filters.
AL3High
Zanussi
Means the anti-flood leak protection system has been activated after water was detected in the base tray, accompanied by three beeps or a constantly draining pump. It is usually caused by a leak triggering the safety float switch, a door not sealing, a filter blockage, or a pump failure.
AL5High
Zanussi
Means the machine is not filling with water or is filling too slowly, also reported as i10 or i11. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or an activated flood protection system.
C1High
Zanussi
Means the machine is not receiving enough water or cannot detect that filling has started, accompanied by a single beep or flash. It is usually caused by a closed tap, a blocked hose, or a malfunctioning inlet valve.
E1High
Zanussi
Means a water fill failure, an inlet timeout where the machine has not received sufficient water within the designated time. It is usually caused by a closed tap, a kinked hose, or a blocked inlet filter.
E2High
Zanussi
Means the machine is not filling with water or low water pressure has been detected, while on compact models it means the wash water has failed to reach the target temperature. It is usually caused by a water inlet problem, or on compact models a heating fault.
I10High
Zanussi
Means the machine is not filling with water or is filling too slowly. It is usually caused by a closed water tap, a kinked inlet hose, a clogged filter, or a faulty water inlet valve.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off at the mains and turn off the water supply before you start.
You’ll needPliers
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 1523396206
- Alternative Part Numbers
- 1523396040, 1523396057
- EAN / Barcode
- 7321421578101
- Genuine Spare Part
- Yes
07
More Details
This is a genuine water block inlet hose for your dishwasher.
Helps protect your home from water damage by automatically shutting off the flow if it detects a leak or unexpected surge in pressure. It’s fitted with a built-in water block that monitors how much water is flowing into your dishwasher and stops it immediately if something goes wrong.
If your current hose is damaged, leaking, or showing signs of wear, it’s time for a replacement. Swap it out with this part.
This dishwasher water block inlet hose is from Rex. Also fits AEG, Corbero, Electrolux, Elektron, Ikea, Kuppersbusch, Zanussi, and Zoppas models.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Replacement hose
Good quality product. Queried suitability as replacement for existing faulty hose. Very fast response from Ransom confirming that it was an updated version and definitely suitable. Extra length and flexibility made for an easy fit.
Brian Towse · Middlesbrough ·
Quality
Value
Ease of Fitting