Hotpoint
Hotpoint Dishwasher Wash Pump MotorC00635474
Suitable for Hotpoint, Ignis, Indesit, Whirlpool
Stock Code: 920200
£39.70inc. VAT
£33.08 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Pumps water through the spray arms over the dishes during the wash.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| A11 | Indesit | Means a failure in the wash motor or diverter valve that stops the water circulating properly. It is usually caused by a broken circulation pump or a failed motor assembly. | High |
| A9 | Indesit | Means a main wash triac fault affecting the wash motor or the control board that drives it. It is usually caused by a failed wash motor or a faulty control board. | High |
| F4E1 | Whirlpool | Means there is a communication failure between the main control board and the wash motor circulation pump. It is usually caused by loose wiring harness connections, a faulty pump, or a faulty control board. | High |
A11High
Indesit
Means a failure in the wash motor or diverter valve that stops the water circulating properly. It is usually caused by a broken circulation pump or a failed motor assembly.
A9High
Indesit
Means a main wash triac fault affecting the wash motor or the control board that drives it. It is usually caused by a failed wash motor or a faulty control board.
F4E1High
Whirlpool
Means there is a communication failure between the main control board and the wash motor circulation pump. It is usually caused by loose wiring harness connections, a faulty pump, or a faulty control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- C00635474
- Alternative Part Numbers
- C00305341, C00305383, C00633897
- EAN / Barcode
- 8015250958690
- Genuine Spare Part
- Yes
07
More Details
This is a genuine wash pump motor for your dishwasher. Made of durable plastic to withstand exposure to water and detergent. Its compact size fits within your dishwasher's interior.
Water not circulating properly during wash cycles? Might be an issue with your pump motor.
It pulls water from the dishwasher's bottom and then pumps it through spray arms or jets for even distribution across plates. Pressured water sprinkles the dishes from various angles to loosen food particles and dirt.
The pump motor also comes with a new seal.
This dishwasher pump motor is manufactured by Hotpoint. Also works on other dishwasher brands like Ariston, Bauknecht, Indesit, Kitchenaid, and Whirlpool.
Before ordering, please verify that this kit works for your model using our compatibility checker.
08
Questions & Answers (1)
Hi, Will this fit Hotpoint HFC 3C26 W SV UK?
A · Cambridge ·
Hi, the wash pump motor required for your model is RS600819.
JordanStaff·