Hotpoint
Hotpoint Dishwasher Heater AssemblyC00856635
Suitable for Hotpoint, Ariston, Bauknecht, Indesit, Kitchenaid
Stock Code: 600820
·
£47.10inc. VAT
£39.25 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the water as it circulates through the cycle.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| A4 | Ariston | Means the machine cannot heat the water to the required temperature. It is usually caused by a failed heating component or a fault on the control board. | High |
| E3 | Ariston | Means the machine has failed to drain within the allowed time or the water has not reached the correct temperature. It is usually caused by a blocked filter, an obstructed drain hose, or a malfunctioning heater or thermistor. | Medium |
| F8 | Ariston | Means the machine is not heating the water properly, or on some models there is a blocked drain system. It is usually caused by a faulty NTC water temperature sensor, a water level sensor issue, or a blocked filter or pump. | High |
| F10 | Hotpoint | Means a heating fault or a fill and drain timeout, where the machine fails to heat water or detect it properly. It is usually caused by a failed heating element, a faulty thermistor, or a blocked water intake. | High |
| A11 | Indesit | Means a failure in the wash motor or diverter valve that stops the water circulating properly. It is usually caused by a broken circulation pump or a failed motor assembly. | Medium |
| F10 | Indesit | Means a heating element fault, where the machine cannot heat the water to the required temperature within the set time. It is usually caused by a failed heating element, a tripped thermal cut-out, or a wiring fault. | High |
| E3 | Whirlpool | Means the water is not heating properly or the heating element is malfunctioning. It is usually caused by a blocked filter, excessive sudsing, or a failure to heat. | High |
| H1 | Whirlpool | Means a heating circuit fault where the unit is having trouble heating water, or that a delay start is active. It is usually caused by a faulty control board or a failure to heat. | High |
A4High
Ariston
Means the machine cannot heat the water to the required temperature. It is usually caused by a failed heating component or a fault on the control board.
E3Medium
Ariston
Means the machine has failed to drain within the allowed time or the water has not reached the correct temperature. It is usually caused by a blocked filter, an obstructed drain hose, or a malfunctioning heater or thermistor.
F8High
Ariston
Means the machine is not heating the water properly, or on some models there is a blocked drain system. It is usually caused by a faulty NTC water temperature sensor, a water level sensor issue, or a blocked filter or pump.
F10High
Hotpoint
Means a heating fault or a fill and drain timeout, where the machine fails to heat water or detect it properly. It is usually caused by a failed heating element, a faulty thermistor, or a blocked water intake.
A11Medium
Indesit
Means a failure in the wash motor or diverter valve that stops the water circulating properly. It is usually caused by a broken circulation pump or a failed motor assembly.
F10High
Indesit
Means a heating element fault, where the machine cannot heat the water to the required temperature within the set time. It is usually caused by a failed heating element, a tripped thermal cut-out, or a wiring fault.
E3High
Whirlpool
Means the water is not heating properly or the heating element is malfunctioning. It is usually caused by a blocked filter, excessive sudsing, or a failure to heat.
H1High
Whirlpool
Means a heating circuit fault where the unit is having trouble heating water, or that a delay start is active. It is usually caused by a faulty control board or a failure to heat.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliers
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- C00856635
- Alternative Part Numbers
- C00302489, C00856634
- EAN / Barcode
- 8058331024891
- Genuine Spare Part
- Yes
07
More Details
Genuine heater assembly for your dishwasher.
Heats water to optimal cleaning temperature. Also ensures proper drying of dishes by heating the air during the drying cycle. Helps maintain consistent water temperature throughout the wash cycle.
A damaged heater assembly can cause dishes to remain wet after the cycle, extended cycle times, the water not heating properly during the wash, and error codes indicating heating problems. Change it with this replacement part.
This heater assembly is from Hotpoint. Also fits Ariston, Bauknecht, Indesit, Kitchenaid, and Whirlpool dishwashers.
Before ordering, please verify that this set is suitable for your model using our compatibility checker.
08
Customer Reviews (7)
4.97 reviews
5
6
4
1
3
0
2
0
1
0
Sort by:||
Great price, fast delivery
Item was delivered fast and in good conditions, everything fitted fine with no complications.
Catalin · Watford ·
Quality
Value
Ease of Fitting
Great product
Part had slightly different hose on top end, but was able to use old one. Very happy with quality and delivery of product.
Kerry Collins · Alton ·
Quality
Value
Ease of Fitting
perfect fit and easy to replace
The service we had from Ransom spares was really good, we ordered online and paid for the express delivery and even though it was a weekend got an instant reply. The part arrived on time and was well wrapped. Really easy to fit. Love the Ransom spares website as it really helps you to find the correct part.
Jayne Lawley Morris · Sunbury On Thames ·
Quality
Value
Ease of Fitting
Easy to fit ….
I had error code 10 on the dishwasher and the water was cold - a quick google confirmed it was the heating element. Tipped the unit on its side - took a few photos to ensure correct fitment. In total it took no more than an hour. The part included a new O ring seal, however you will need a two jubilee clips (screwfix) as the factory fitted are single use. Hot water again and error code cleared. Fast delivery, great price and super easy to fit
DIY it’s cheaper · Oswestry ·
Quality
Value
Ease of Fitting
Great price, easy to fit
Bought to repair dishwasher not heating water. Fitted in minutes. Saved an expensive repair man.
Stephen Nigel Keast · Tamworth ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
Does the heater element come with seal kit
Richard · Norwich ·
Hi Richard, I can confirm this element is supplied with the seal.
JordanStaff·