Electrolux
Electrolux Dishwasher Water Block Inlet Hose140180589016
Suitable for Electrolux, AEG, Arthur Martin, Atag, Dieter Knoll
Stock Code: 625868
·
£29.00inc. VAT
£24.17 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Brings the mains water into the dishwasher and shuts off if it detects a leak.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| AL5 | AEG | Means a water inlet problem, where the machine is not filling or is taking too long to fill. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or low water pressure. | High |
| C1 | AEG | Means a water inlet problem, where the machine is not filling properly. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or a siphoned drain hose. | High |
| E1 | AEG | Means a water intake problem, where the machine is not filling properly or fast enough. It is usually caused by a closed tap, a kinked hose, or low water pressure. | High |
| E10 | AEG | Means a water inlet fault, where the dishwasher is not filling, fills too slowly, or water pressure is too low. It is usually caused by a closed tap, kinked inlet hoses, or a blocked filter. | High |
| I10 | AEG | Means the machine is not filling or is filling too slowly. It is usually caused by a closed tap, a kinked hose, a clogged inlet filter, or a faulty water inlet valve. | High |
| AL5 | Electrolux | Means the machine is not filling with water or not detecting it fast enough. It is usually caused by a closed water tap, a kinked inlet hose, or a blocked filter in the inlet hose. | High |
| C1 | Electrolux | Means the unit is not filling correctly, filling too slowly, or the water pressure is too low. It is usually caused by a closed water tap, a kinked supply hose, or a clogged inlet filter. | High |
| E1 | Electrolux | Means the unit is not receiving water or not filling fast enough. It is usually caused by a closed water tap, a kinked hose, a clogged inlet filter, or low water pressure. | High |
| I10 | Electrolux | Means the unit is not receiving enough water or is taking too long to fill. It is usually caused by a closed water tap, a kinked supply hose, or clogged inlet filters. | High |
| AL3 | Zanussi | Means the anti-flood leak protection system has been activated after water was detected in the base tray, accompanied by three beeps or a constantly draining pump. It is usually caused by a leak triggering the safety float switch, a door not sealing, a filter blockage, or a pump failure. | High |
| AL5 | Zanussi | Means the machine is not filling with water or is filling too slowly, also reported as i10 or i11. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or an activated flood protection system. | High |
| C1 | Zanussi | Means the machine is not receiving enough water or cannot detect that filling has started, accompanied by a single beep or flash. It is usually caused by a closed tap, a blocked hose, or a malfunctioning inlet valve. | High |
| E1 | Zanussi | Means a water fill failure, an inlet timeout where the machine has not received sufficient water within the designated time. It is usually caused by a closed tap, a kinked hose, or a blocked inlet filter. | High |
| E2 | Zanussi | Means the machine is not filling with water or low water pressure has been detected, while on compact models it means the wash water has failed to reach the target temperature. It is usually caused by a water inlet problem, or on compact models a heating fault. | High |
| I10 | Zanussi | Means the machine is not filling with water or is filling too slowly. It is usually caused by a closed water tap, a kinked inlet hose, a clogged filter, or a faulty water inlet valve. | High |
AL5High
AEG
Means a water inlet problem, where the machine is not filling or is taking too long to fill. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or low water pressure.
C1High
AEG
Means a water inlet problem, where the machine is not filling properly. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or a siphoned drain hose.
E1High
AEG
Means a water intake problem, where the machine is not filling properly or fast enough. It is usually caused by a closed tap, a kinked hose, or low water pressure.
E10High
AEG
Means a water inlet fault, where the dishwasher is not filling, fills too slowly, or water pressure is too low. It is usually caused by a closed tap, kinked inlet hoses, or a blocked filter.
I10High
AEG
Means the machine is not filling or is filling too slowly. It is usually caused by a closed tap, a kinked hose, a clogged inlet filter, or a faulty water inlet valve.
AL5High
Electrolux
Means the machine is not filling with water or not detecting it fast enough. It is usually caused by a closed water tap, a kinked inlet hose, or a blocked filter in the inlet hose.
C1High
Electrolux
Means the unit is not filling correctly, filling too slowly, or the water pressure is too low. It is usually caused by a closed water tap, a kinked supply hose, or a clogged inlet filter.
E1High
Electrolux
Means the unit is not receiving water or not filling fast enough. It is usually caused by a closed water tap, a kinked hose, a clogged inlet filter, or low water pressure.
I10High
Electrolux
Means the unit is not receiving enough water or is taking too long to fill. It is usually caused by a closed water tap, a kinked supply hose, or clogged inlet filters.
AL3High
Zanussi
Means the anti-flood leak protection system has been activated after water was detected in the base tray, accompanied by three beeps or a constantly draining pump. It is usually caused by a leak triggering the safety float switch, a door not sealing, a filter blockage, or a pump failure.
AL5High
Zanussi
Means the machine is not filling with water or is filling too slowly, also reported as i10 or i11. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or an activated flood protection system.
C1High
Zanussi
Means the machine is not receiving enough water or cannot detect that filling has started, accompanied by a single beep or flash. It is usually caused by a closed tap, a blocked hose, or a malfunctioning inlet valve.
E1High
Zanussi
Means a water fill failure, an inlet timeout where the machine has not received sufficient water within the designated time. It is usually caused by a closed tap, a kinked hose, or a blocked inlet filter.
E2High
Zanussi
Means the machine is not filling with water or low water pressure has been detected, while on compact models it means the wash water has failed to reach the target temperature. It is usually caused by a water inlet problem, or on compact models a heating fault.
I10High
Zanussi
Means the machine is not filling with water or is filling too slowly. It is usually caused by a closed water tap, a kinked inlet hose, a clogged filter, or a faulty water inlet valve.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your dishwasher.
Safety: Switch off at the mains and turn off the water supply before you start.
You’ll needPliers
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- 140180589016
- Alternative Part Numbers
- 1560631002, 1560631036, 8072506044, 8072506176
- EAN / Barcode
- 7321422652305
- Genuine Spare Part
- Yes
07
More Details
Genuine 147.5 cm inlet hose for your dishwasher. Has hose fittings on one end to connect the dishwasher to the water source.
The stopper on the hose helps prevent flooding by automatically shutting off water flow if it detects a leak.
Check for leaks, cracks, or tears in the hose, as well as any discoloration, which indicate damage and may affect its performance. Change it with this replacement part.
This is a water block inlet hose from Electrolux. You can also check the other suitable brands from the list above.
Before ordering, please verify that this set is suitable for your model using our compatibility checker.
08
Customer Reviews (4)
5.04 reviews
5
4
4
0
3
0
2
0
1
0
Very easy to fit
This was very easy to fit and was better than the original. The water pipe was much more durable and unlikely to split as the original part had done.
Martyn Smith · Honiton ·
Quality
Value
Ease of Fitting
Identical replacement inlet hose for my AEG Favorit Dishwasher
Dishwasher started leaking on Saturday before Christmas, ordered replacemnt part from Ransom Spares same day, which was dispatched by Ransom Spares Sunday and arrived just after Christmas, fairly easy to change to hose and has not leaked since replacing. Very impressed with ordering and delivery process!!
John Cutler · Eastleigh ·
Quality
Value
Ease of Fitting
Genuine Part at good price
Another Genuine part at a competitive price from Ransom Spares
Andrew Sheppard · Merriott ·
Quality
Value
Ease of Fitting
Perfect replacement
Arrived promptly, easy to fit if you are DIY minded
Stephen Chapman · Sheerness ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
AEG dishwasher PNC 91153916103 / Model F34300VI0: How do I detach the old aquastop inlet hose/attach the new one?
William · Norwich ·
Hi William, I'm afraid we can't offer fitting instructions. I'd recommend contacting an engineer directly.
JordanStaff·